The Best 2Din Dash Kit

Double DIN Installation Dash Kit for Select 1990-Up GM Vehicles

Double DIN Dash Kit for Select 1992 – Up GM & Select 1992 – 2008 Honda, Isuzu, Suzuki, and Toyota Vehicles. Kit Includes: Radio Trim Panel, Radio Housing Brackets, & #8 x 3/8″ Phillips Screws (4). Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.

Single/Double DIN Dash Installation Kit For 2011-Up Chevy Cruz Vehicles. Accomodates ISO single/double DIN mount. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit. Painted to match factory dash color. High-grade ABS plastic construction. Factory style texture. All necessary hardware to install an aftermarket radio

Double DIN (Black) Dash Kit For Toyota Tacoma 2005-2011 Vehicles

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.

Metra 95-7406 Double DIN Installation Dash Kit for 2004-2007 Nissan Titan and 2004-2005 Nissan Armada (Silver), Install dash kit for Double DIN/ISO Radios, Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit, Painted Silver to match factory dash color, High-grade ABS plastic construction, Factory style texture. Kit Includes: Double DIN Radio Housing, Radio Housing Trim Plate, Double DIN Brackets, Double DIN Trim Plate, Six PPH-38 Screws, Six Panel Clips and Two Sided Tape

Product Description

Single / Double DIN Black Stereo Dash Kit (99-6519B) by Metra. When you need to install a double-DIN radio or single-DIN radio with a pocket in the dash of your vehicle, this stereo dash kit is what the doctor ordered. Made of premium quality ABS plastic

From the Manufacturer

Complete your radio provision with Metra. This installation kit is single- and double-DIN, painted matte black, and fits Dodge Charger 2006–2007 and Magnum 2005–2007.

#1. Standard Wire Harness This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). #2. Premium Wire Harness Module This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features #3. Premium Wire Harness Module w/ Steering Wheel Control This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features. This harness also allows you to keep your factory steering wheel controls and use them with your aftermarket radio.

Double-DIN Dash Kit for Honda Fit 2009-13

Single or double din installation dash kit for 2006-up Honda civic. Kit includes: radio housing, radio housing trim plate, iso brackets, iso trim plate, & radio housing brackets. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.