Finding your suitable readers for 1 hp sta-rite well pump is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 1 hp sta-rite well pump including detail information and customer reviews. Let’s find out which is your favorite one.
511 reviews analysed
1. Simer 3310P 1 HP Convertible Deep Well Jet Pump
Description
Product Description
1 HP Convertible Deep Well Jet Pump.
From the Manufacturer
1 HP Convertible Deep Well Jet Pump.
2. Flotec Fp4032 Thermoplastic Shallow Well Jet Pump, 1 Hp
Description
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25′ or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor – 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
3. Sta-Rite 20DOM05121 STEP Plus D-Series High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V
4. 1/2 HP Shallow Well Jet Pump by Lanchez Stainless Steel Water Pump Transfer Removal Irrigation Pumps for Clean Water 960GPH
Feature
- 1/2 HP
- Flow rate to 960 gallons per hour
- Corrosion-resistant stainless steel construction extends product life and is easy to clean.
- Lower noise and emergy-efficient motor with thermal overload protection.
- Designed for continuous duty use in watering application. Suitable use in garden, lawn, farm and rural house.
- UL certificated. TIP: Please add some water to the outlet before operation.
5. Acquaer 1 Hp 11.5GPH Cast Iron Convertible Jet Pump
Description
Acquaer CJE100 is a 1 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery
6. Sta-Rite DS3HF 1.5HP Centrifugal Pump
7. STA-Rite SND-L Shallow Well Jet Pump 3/4HP 115/230V
Feature
- Quality Construction – Close-grained cast iron body. Drain port provided for easy winterizing
- Precision Molded Diffuser – Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser.
- Motor Windings – Superior insulation materials protect against excessive moisture and contaminants…assure prolonged motor life.
- Voltage: 115v / 230v, 60Hz, 1-phase, High-flow version of the 1/2 HP model allows higher flow rates with less horsepower and pressure, Pressure regulator included
- Note : All Pumps, Are Tested By The Manufacture, Prior To Shipping. At Times You Will Encounter A Smalll Amount Of Water Residue Left Over From The Test., Returns will not be ACCEPTED if item has been INSTALLED or there should be no signs of installation. Must be returned in the Same Packaging as received.
Description
The ProJet SN Series provides excellent performance with strong pressure for wells to 25 ft. deep. Quality Construction – Close-grained cast iron body. Drain port provided for easy winterizing. Precision Molded Diffuser – Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser. Motor Windings – Superior insulation materials protect against excessive moisture and contaminant assure prolonged motor life. Heavy-duty Ball Bearings – Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth quiet operation. High-flow version of the 1/2 HP model allows higher flow rates with less horsepower and pressure. Body Construction: Cast Iron. Horsepower: Available in 1/2, 3/4, 1, and 1-1/2 HP. Maximum Capacity: 13.7 GPM (SNC-HF25L model). Flow at 10' List and 40 PSI: 11.4 GPM (SND model). Max Lift: 25' Maximum Shut-off Pressure: 70 PSI (on SNC & SND models). Maximum Inlet Pressure: 50 PSI (inlet pressure + discharge not to exceed 100 psi). Pressure Switch Setting: 30 – 50 PSI (except Hi-Flow model SNC-HF25L uses 20-40). Suction Size: 1-1/4" NPT. Drive Size: n/a. Discharge Size: 1" NPT. Amp Draw (at full load): Recommended Breaker: Model and Voltage Dependent. Voltage: 115v / 230v, 60Hz, 1-phase. Maximum Liquid Temperature: 140°F (60°C).
Note : All Pumps, Are Tested By The Manufacture, Prior To Shipping. At Times You Will Encounter A Smalll Amount Of Water Residue Left Over From The Test.
Returns will not be ACCEPTED if item has been INSTALLED or there should be no signs of installation. Must be returned in the Same Packaging as received.
8. GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump, 1.5 hp, Blue
9. Simer 3410P 1 HP Spinkler System Pump
Description
Product Description
1 HP Spinkler System Pump.
From the Manufacturer
1 HP Spinkler System Pump.
10. Simer 3105P 1/2 HP Shallow Well Jet Pump
Description
Product Description
1/2 HP Shallow Well Jet Pump.
From the Manufacturer
1/2 HP Shallow Well Jet Pump.
Conclusion
By our suggestions above, we hope that you can found 1 Hp Starite Well Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
