The Best Shop Vacuum Tool Power

Feature

• Unique Current Sensing Technology. If the tool motor connected to the ‘A’ port exceeds 30W, the vacuum connected to the ‘B’ port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time
• Make the work more effective. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems
• Suitable for most medium duty workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
• Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch’s shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work
• Two Installation Methods. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong

Feature

• ESSENTIAL: Auto on off & means less dust! i-Socket supports OSHA compliance, a safety and convenience must-have in the workshop or indoor jobsite.
• EFFICIENT: Saves time, minimizes hazardous airborne dust, reduces cleanup and noise so you can focus on your work.
• INTUITIVE: Using i-Socket is an easy 3 step process. With Workshop you just plug-in and get to work.
• NEW UPDATED DESIGN: i-Socket Workshop features two accessory outlets, a durable enclosed casing, Mode switch and LED safety indicators.
• FLEXIBILITY The Mode switch allows the Workshop to function in Auto and Manual Mode for when you want to control use of the vacuum and accessory.

Feature

• 1-1/4″ diameter x 20-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1”, 1-1/4”, 1-½” internal and external connections for dust collection
• The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting
• Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool
• Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric
• The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 ½” vacuum connection
• Expanded version of Cen-Tec’s popular 94192 dust collection hose with additional ¾”, 1-1/4” power tool adapters, and additional 2 ½” shop vacuum adapter
• The inner collar and extra-durable acetal clip ring are designed to fit to tools directly that accept a quick click collar connection. The collar connector is 1-3/4″ on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature
• Additional 2 ½” cuff mounted on a bayonet allows the operator to use dust collection workstations with home shop vacuums popular with table saws
• The soft TPE of the fitting allows the fitting to form to the shape of the exhaust port off of the selected power tool
• The Cen-Tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum

Feature

• Our small 1-3/16″ O.D. flexible dust collection power tool hose moves freely when connected with your power tools and vacuum. The hose with its specialized fittings, work with multiple power tools and jigs.
• The small end of the hose is ideal for connecting random orbital sander, palm sanders, biscuit joiners or any other power tool with small dust collection ports. This kit will also work with popular tools like the K4 or K5 Kreg Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
• Included inside the box: 1 each ten foot long 1-3/16″ O.D. small flexible hose, 2 each small flexible rubber screw on fitting, 2 each large flexible rubber screw on fitting and 2 each plug in shop vacuum adapter that will allow you to connect the hose to most shop vac’s.
• The small screw on rubber fitting has a 1″ I.D. with a 1-3/16″ taper up to 1-1/4″ O.D. , the large screw on rubber fitting has a 1-1/2″ I.D. with a 1-25/32″ O.D. The vacuum adapter has a 2-1/4″ taper up to 2-5/16″ O.D. on the large end and the small end of the adapter is designed to plug into the end of the large flexible rubber screw on fitting. The I.D. and O.D. on the rubber end fittings and hose are approximate sizes and may vary slightly.
• PLEASE NOTE: Before you place your order, please check the inner and outer (I.D. and O.D.) diameter of your vacuum ports and power tool ports to make sure the hose and fittings will fit properly and work for your needs.

Feature

• 1. 25″ diameter X 10 foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with 1. 00″ and 1. 50″ internal and external connections for dust collection
• The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting
• Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, a bayonet fitting with a 1″ soft TPE fitting, and a second bayonet with a soft 1. 50″ TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool
• The soft molded TPE fitting measures 1″ on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 1″ soft TPE part measures 1. 40″ on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit
• Includes a second bayonet with a soft molded TPE fitting that measures 1. 50″ on the inner diameter with three concentric rings to hold firmly to the power tool even when carrying a substantial flow of debris in the air stream. The fitting measure 1. 90″ on the outer diameter. The soft TPE allows the fitting to form to the shape of the exhaust port off of the selected power tool
• The inner collar and acetal clip ring are designed to fit to tools directly that accept a quick click collar connection. The collar connector is 1. 75″ on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature
• Designed to fit all major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric
• The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5″ vacuum connection

Feature

• Ensures excellent work room air quality and shop cleanliness
• Compatible with Porter-Cable Random Orbit Sander models 7334, 7335, 7336 and 333VS
• Fits most palm sanders, Shop-Vac products and others with 1-Inch, 1-1/2-Inch and 2-1/2-Inch ports
• 1-1/4 in. x 10 ft. flexible hose for easy positioning
• Fitting size: 1-3/4-Inch OD/1-1/2-Inch ID
• 1-3/16-Inch OD/1-Inch ID: Includes 2-1/2-Inch to 1-1/2-Inch reducer

Feature

Feature

• [LIGHTWEIGHT DESIGN] Easy to move, easy to store, easy to vacuum in tight spaces, the ultimate in convenient cleaning
• [ATTACHMENTS] Comes with a crevice nozzle and a brush, perfect for getting crumbs out of dashboards or lint off of furniture
• [STRONG SUCTION] 10 kPa is a lot of power for its weight class—this tool might be small, but it’s mighty
• [EASY EMPTY] One-touch, no fuss button when the container is full—and the washable triple HEPA filter keeps the dirt from cycling back into the air
• [DO IT ALL WITH THE SAME BATTERY] Do it all with WORX PowerShare, the only cordless tool platform that uses the same battery to power 20V and 40V tools

Feature

• 2640 TOTAL WATTS two input power cords permit operation from two separately protected circuits.
• TURN ON DELAY avoids the two power surges occurring at the same time.
• TURN OFF DELAY ensures that your work area continues to be cleared of remaining airborne debris.
• Modes of operation: Auto, Off and On. Dust Collector / Shop Vacuum up to 1HP or 5 Peak HP.
• NO VENTING HOLES the iVac’s internal components are designed to generate very little heat.