Top 10 Solvent Vacuum Pump

Robinair’s 15800 VacuMaster Economy Vacuum Pump is a high performance, heavy duty 2-Stage rotary vane design vacuum pump designed for commercial refrigeration use. With an 8 CFM free air displacement, factory rating to 40 microns, and 18.6 ounce oil reservoir, this unit has the capacity you need to get the job done. This robust unit features a 1 HP, 115V, 60 Hz thermally protected motor; an inlet fitting engineered for maximum airflow while preventing oil backflow; finned aluminum surfaces that dissipate heat faster (keeping pump cooler and extending life); 1/4″ & 3/8″ MFL inlet fittings; easy to read sight glass; easy access oil fill port; oil drain valve positioned at the bottom of the oil reservoir and angled for faster, more complete draining, and non-skid feet. Oil included. Robinair, a Bosch Automotive Service Solutions brand, is a global leader in service tools and equipment based in Owatonna, Minnesota. Robinair is recognized throughout the world as the quality and performance leader in AC/R evacuation tools and this position has led to its success with the full range of products that serve the heating/ventilating/air conditioning/refrigeration (HVAC-R) and mobile markets, which includes the automotive aftermarket along with other industries such as agriculture and construction.

Specification:

Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Cable Length: Approx. 30cm / 11.8inch
Clips Length: Approx. 8cm / 3.15inch
Outlet PVC pipe Length:150cm
Nylon pipe Length:100cm
Brass pipe Length:70cm

Package include:

1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe

How to use:
 1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil 
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean
If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out

Note: If you want to connect this pump to AC power, you will need a power converter.

Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. We’ve earned our reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Dorman, we take pride in the quality of our products and in your satisfaction.

Dorman is well-known as a leader in providing quality auto parts to the aftermarket. Dorman has earned the reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. The prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere.

It controls the inlet and outlet of the diaphragm, forms the drive mechanism after the power drive to drive the reciprocating movement of the piston, and drives the diaphragm back and forth through the hydraulic pressure to work to suck and discharge.

Specification:
Voltage: 24V
Flow rate: liquid (320ml/min), gas (3.2L/min)
Self-priming height: 4 m
Pressure: liquid (3bar), gas (1bar)
Flow rate: 0.4 -1L/min
Ambient temperature: 0-40℃
Size: 8.5*3.3cm/3.4*1.3in
Weight: Approx.239g/8.4oz

Package Included:
1 x Diaphragm Pump

This light duty rotary vane transfer pump is portable and self priming. The pump is cast iron and produces a flow rate of 10 GPM. It is powered by DC voltage. Battery cable with clips is included. As a complete pump kit it also has 8 of 3/4 inch hose, pick up strainer, for the inlet and outlet, and a plastic 3/4 inch plastic nozzle. The pump is compatible with diesel and antifreeze fluids.

➤Specificaiton:
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees)
Flow Rate: approx. 1L / min
Diesel or heating oil: approx 250 L/H
Sound pressure level:70dB(A)

➤Size:
Oil Change Pump Extractor: 14*13cm
Inlet Hose Length: approx. 120cm
Inlet Hose Outer Diameter: 6mm/0.236”
Inlet Hose Inner Diameter: 4mm/0.157”
Outlet Hose Length: approx. 150cm
Outlet Hose Outer diameter: 12mm/0.472”
Outlet Hose Inner Diameter: 10mm/0.39”
Line Length: approx. 71cm/28”

➤Widely use:
Extracting motor oil from your vehicle without Mess & Specialised.
It can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.

➤Easy Installation:
Place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.
This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.

➤WARNING:
This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running.
We recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool.

➤Package Included:
1 x Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps