Top 10 Generator Disconnect Switch Ge

UL & CSA compliant. The EZ Generator Switch is a single-circuit 15 Amp, 125-volt transfer switch in the generator position and 20 amp rated in the normal position. It controls heating systems, lighting circuits, convenience outlets, refrigerators, sump pumps, and 120-volt well pumps. We are also compatible with SOLAR SYSTEMS and INVERTERS. The unit is completely pre-wired and comes with 24-inch leads, wire nuts, back box, and directions / wiring diagram to connect to circuit panels or equipment. During a power outage, simply plug your extension cord (12 gauge cord recommended and only the length you need) from your generator into the EZ Generator Switch and place the switch into the ‘Generator’ position. No worrying about back-feeding or messing with breakers. When the power resumes, simply place the EZ Generator Switch back into the ‘Normal’ position. Our switch is Universal and can be converted for both types of generators (bonded or floating neutrals) in less than 2 minutes, in addition we provide full support. Never purchase a transfer switch that has not been tested/approved by UL & CSA

Product Description

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty and ships in a plain white recyclable box.

Amazon.com

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty.

The Reliance Control Pro/Tran 30-Amp Indoor Transfer Switch is easy to install and operate. The purpose of a transfer switch is to connect a secondary power source, like your generator, to circuits in your home or building that are wired into the electrical system. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. The transfer switch ensures that you can safely use back up power during a power outage without having to worry about back feeding the utility line. In an emergency situation you might not think to shut off the main power source, the transfer switch makes it so you do not have to worry about that. Each individual circuit can be transferred separately and only as needed. This transfer switch features 6 15-amp single pole circuit breakers and 4 20-amp single pole circuit breakers. The recommended cord size for this switch is a 10-gauge cord. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

Generator Interlock Kit for General Electric Vertical Main 150 or 200 amp break. Spacing between main and branch breaker is 2 1/2 to 3 1/2 inches. This model replaced GE-200VA and GE-200XL. Met lab listed E113887. Panel and breakers not included

Product Description

The Reliance Controls TF151W Easy/Tran Transfer Switch is easy to install and easy to use. It is ideal for controlling a single 15 Amp circuit, such as a forced-air furnace. The transfer switch ensures that you can safely use back up power during a power outage without having to worry about back feeding the utility line. In an emergency situation you might not think to shut off the main power source, the transfer switch makes it so you do not have to worry about that. The TF151W comes with an attached 18″ flexible aluminum conduit for easy attachment to the circuit breaker panel or furnace or at any point in between. Power can be supplied from a portable generator, inverter, RV generator, fuel cell or any standby source capable of producing sufficient current. This model uses a standard grounded extension cord. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

Amazon.com

The Reliance Controls single-circuit 15 Amp furnace transfer switch is designed for use with generators with 15 Amp power outlets. It controls a single circuit, such as a forced-air furnace, in the event of a power failure, connecting it to a portable generator. The attached 18-inch flexible aluminum conduit is pre-wired and allows the unit to be easily connected at the circuit breaker panel, the furnace, or at any point in between. It can be used on any 15 Amp 120-volt forced-air furnace circuit. Simply plug a standard grounded extension cord into a power outlet on your generator and into the built-in plug on the transfer switch. It includes an indicator light, which illuminates the area around its switch during a power outage. This unit is UL listed and is covered by a 5-year limited warranty.

See all Product description

Product Description

Square D by Schneider Electric 60A General Duty Safety Switch, 2 Cartridge Fuse, Fusible, 3 Wire Solid Neutral, 120/240V, Indoor, UL Listed.

From the Manufacturer

WARNING: This product can expose you to chemicals including DINP which is known to the State of California to cause cancer and DIDP which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Reliance Controls CSR302 Easy/Tran Transfer Switch installs quickly and easy to use. It is ideal for controlling single-circuit farm buildings, irrigation systems, community wells, telecommunication substations, traffic signals, commercial garage doors, cell towers, sewer and water lift stations, septic pumps, industrial sump pumps, electric water heaters, electric heat and much more. The transfer switch ensures that you can safely use back up power during a power outage without having to worry about back feeding the utility line. In an emergency situation you might not think to shut off the main power source, the transfer switch makes it so you do not have to worry about that. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

Product Description

The Square D by Schneider Electric 100 Amp 240 Volt 3 Pole Indoor Not Fusible General Duty Safety Switch is designed for residential and commercial applications where durability and economy are prime considerations. Typical loads are lighting, air conditioning and appliances. This switch is suitable for use as service entrance equipment when equipped with a service grounding kit. The switch is UL listed, File E2875, and meet or exceed the NEMA standard KS1. For more than 100 years the Square D brand safety switch has been the unchallenged leader in the market. We’ve continued our tradition of innovation, developing new features that provide an unsurpassed level of performance, reliability, safety and ease of installation. This tradition has resulted in the Square D brand being preferred two to one over our closest competitor.

From the Manufacturer

WARNING: This product can expose you to chemicals including DINP which is known to the State of California to cause cancer and DIDP which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Product Description

The Reliance 20216A Control Pro/Tran Indoor Transfer Switch is easy to install and operate. The purpose of a transfer switch is to connect a secondary power source, like your generator, to circuits in your home or building that are wired into the electrical system. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. The transfer switch ensures that you can safely use back up power during a power outage without having to worry about back feeding the utility line. In an emergency situation you might not think to shut off the main power source, the transfer switch makes it so you do not have to worry about that. Each individual circuit can be transferred separately and only as needed. This transfer switch features 6 15-amp single pole circuit breakers and 1 20-amp single pole circuit breakers. This model includes a separate flanged inlet for direct generator connection in a dry location. The recommended cord size for this switch is a 12-gauge cord. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

From the Manufacturer

6-Circuit 20-Amp Transfer Switch for Generators up to 5000 Running-Watt. For generators with NEMA L14-20 power outlets. The safe, code-approved way to provide emergency power to your home or business during a power outage. The proper connection between a portable generator and selected circuits in a load center allows the user to efficiently and easily operate appliances such as a furnace, refrigerator, sump pump, TV, well pump, lights and more. Power can be manually transferred for each appliance independently at users choice without danger of backfeeding the electrical utility. Internal wiring compartment allows for optional hardwiring to remote power inlet boxes. Dual-Wattmeters monitor load in generator. Completely pre-wired with individual wires marked by circuit. Indoor surface-mount design. cUL 1008 listed. Made in USA. 5 year warranty