Top 10 Cooling Enclosure

When connecting TDBT SuperC to a USB 3.1 or Thunderbolt 3 computer, you can get a read/write speed around 1000 MB/s. As a comparison, even for high-end SATA SSD, the Max. Rate is 550MB/s for reading and 450MB/s for writing.

NVMe SSD generates massive heat when working, so we enhanced the cooling system:

1. Double side Copper strip on PCB to conduct heat effectively
2. Specially designed SSD heat sink rapidly radiating heat from internal SSD to external Aluminum case
3. Sturdy Aluminum case with heat exchange fins, practically enlarge the heat dissipation area

TDBT SuperC works with almost all brands M-Key/B&M-Key NVMe M.2 SSD. For Samsung 970 EVO plus SSD, if you want to use with Mac, update the SSD firmware is required. If you need technical support, please contact us.

To get the best performance:

• Your M.2 NVMe SSD read/write speed is faster than 1000MB/s
• Your computer has a USB 3.1 Gen2(Max. Speed 10Gbps) or Thunderbolt 3 port. For USB 3.1 Gen1 port, the max speed you get is 5Gbps only
• If you have a powerful computer, as better

Tech Specs

• Controller chip: JMicron JMS583(PCIe 3.0×2)
• USB 3.1 Gen2 type C interface, Max. 10Gbps for M.2 NVMe SSD
• Support M-Key and B&M-Key NVMe M.2 SSD only, NOT work with M.2 SATA AHCI SSD
• Supports SSD size(mm): 22×30, 22×42, 22×60, 22×80
• Supports Max. 2TB SSD
• Compatible with USB 2.0/3.0/3.1 Gen1/3.1 Gen2/Thunderbolt 3 standard
• Work with Sony PS4/PS4 Slim/PS4 Pro, Microsoft Xbox One/One X as USB external storage. SSD formatting required, back up files before connecting
• Including 0.3M/1FT USB-C to USB-C and USB-C to USB-A data cable, compatible with USB-A/USB-C/Thunderbolt 3 ports
• System requirements: Windows 8.1/10 or later, macOS 10.10.2 or later, Android device should have USB-C port and supports OTG

The Sabrent ec-dffn SATA lay-flat docking station supports the direct insertion of desktop 2.5″/3.5″ Sata hard drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the Lightning speed of USB 3.0 To quickly transfer files up to 5 Gbps!

keep your drives running cool, with built-in cooling fan
The docking station features a built-in cooling fan that provides increased reliability and lifespan to HDD by keeping the drives cooler.
* supports standard desktop 2.5″”/3.5″” Sata hard drives.
* supports hard drives up to 6TB.
* on/off power switch.
* LED light indicates power and activity status.
* hot-swappable, plug and play, no drivers needed.
* reverse compatible with USB 1.1 & USB 2.0.
* transfer rates up to 5 Gbps w/USB 3.0
* transfer rates up to 480 Mbps w/USB 2.0

system requirements:
* available USB 3.0 for high speed data transfer
* Windows: 2000/XP/Vista/7/8 (both 32-bit & 64-bit versions)
* Mac: OS X

package contents:
* Sabrent ec-dffn lay-flat docking
* power supply
* USB 3.0 cable
* user manual

This is a LattePanda alpha 864 or lattePanda alpha 800 aluminum passive cooling are designed for LattePanda alpha 864 or LattePanda Delta; With this box, you no longer need to use a fan to cool the motherboard, you no longer have to endure the noise of the fan, and we reserve all the interfaces and GPIO pins for your DIY. This box uses high-quality aluminum alloy materials. As we all know, aluminum alloy has excellent thermal conductivity. We use high-quality Shin-tsu X-23-7921-5 CPU silicone grease and copper sheet as the filling material for the housing and CPU. This ensures that heat is quickly transferred to the aluminum alloy housing.
In order to facilitate the rapid heat dissipation of the housing, this box also supports the installation of a fan to dissipate the housing, but this is not required.
LattePanda is a win10 mini pc; you can refer to www.lattepanda.com;

Test Experience-Included Cooling Fan:
According to our test, the case can provide enough heat dissipation ability even when the CPU is working on 100%, but this will lead to the temperature of the case (cover) will be up to 72 ℃.
So we design four screw holes on the case for you to install the cooling fan, which can help the case rapidly cooling down when you use the fan on the case. Cooling Fan(4007) is included in this package.
You could also use cooling fans like 4010, 4012 fan. The fan Dimensions should be 40 x 40mm with 32 ± 0.3mm hole, and the screws should be M3 Screws.
We suggest to use the M3 nylon screws, which will not leave scratches on the case.

Package Including:
1 * LattePanda Aluminum Alloy Case
1 * 4007 Cooling Fan
1 * Copper heatsink (0.78 x 0.6 x 0.03inch)
1 * 1g Thermal grease silicone

LIGHTNING SPEED: Fledging Shell Thunder 2 is the next generation of Thunder! It’s our fastest, most elegantly designed external SSD Thunderbolt 3 enclosure. With up to 2TB of data storage and 2,300 MB/s read and 1,700 MB/s write speeds, Shell Thunder 2 is ideal for gaming, video editing, research, design, content creation, and much more.

ACTIVE COOLING: Thunder 2 is re-engineered for active cooling. We stress-tested this design with an Intel SSD by writing 3TB in 60 minutes. The whisper-quiet 4000 RPM fan makes Thunder 2 a bit wider than Thunder.

M.2 NVMe ENCLOSURE: Designed for 2280 and 2260 M.2 NVMe and AHCI SSD. Not compatible with M.2 SATA SSD.

ANODIZED ALUMINUM CASING: We believe products should look and feel good. Thunder 2 is built with a rugged anodized aluminum casing, built to look good while protecting your data.

UNMATCHED CUSTOMER SERVICE: We are here to delight you. Ask us any questions or for support at any time.

FLEDGING’S MISSION: Fledging is on a mission to create accessible, affordable premium consumer electronics. The market offers two bad choices: skip your next month’s rent for new tech or choose an off-brand gadget doomed to break the day after the return policy expires. Fledging offers a third choice by creating premium tech at a non-premium price.

COMPATIBILITY NOTE: Shell Thunder 2 is not compatible with Apple SSDs, including our Fledging Feather SSD.

ineo believes protection is never enough for your precious data in your M.2 NVMe SSD, so we introduce a best cooling enclosure 2598NVMe with transfer in USB 3.2 Gen 2 10Gbps ultra fast speed.

Features:
1. Ultra fast 10Gbps USB 3.1 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
2. Bundled with silicone thermal pad for better cooling down during high speed transfer
3. Supports Hot-swapping, plug and play function, instant connection when plugged to PC.
4. Built-in silent fan for positive heat dissipation, 3.3V 6000 RPM, smart active when temperature is over 45 degree centigrade

System requirements:
Windows: 7, 8, 8.1. 10 (Both 32-bit & 64-bit versions)
MAC: OS X

Package Contents:
1 x ineo C2598 Rugged Aluminum M.2 NVMe SSD Enclosure
1 x Screws Kit
1 x Silicone Thermal Pad
1 x User Manual
1 x Guarantee Card

Internal Interface：M.2 M-Key
External Interface：USB3.1 Gen2 Type-C
Control chip：ASM2362(10Gbps)
Support SSD：M.2 NVMe SSD
Transfer Speed：USB3.1 Gen 2 10Gbps(Theoretic)
Supported OS：Windows/Linux/Mac
Product material：Aluminum alloy + stainless steel
Cable length：24cm/9.44 inches
Adapter：USB Type-A to C adapter

– Newest NVMe PCIe to 10Gbps USB3.1 Gen2 Adaptor
– Two 10Gbps USB Type-A and Type-C Cables included
– Premium Aluminum Case with Excellent Cooling Effort
– 2280, 2260, 2242, 2230 form factor; ‘M’ and ‘B+M’ Key
– Thermal Silicon Pad Design – Excellent Heat Dissipation
– Compatible with multi-OS: Windows 7, 8, 10 & Mac OS
– Comply with Trim, UASP, Power Saving and Plug & Play

Compatibility Note on NV-i9:
● The adapter fits NVMe PCIe M.2 ONLY!
● NVMe come in ‘M’ or ‘B+M’ key, however, many SATA NGFF also come in ‘B+M’ which is NOT supported. You can NOT classify a ‘B+M’ disk by ‘KEY’ form. Do a research and make sure it is ‘NVMe’
● The card reader does NOT fit SATA NGFF, PCIe AHCI, mSATA or SSDs pulled from Apple Mac
● Some rare disks come in multiple editions with different interface, for example Samsung SM951 (NVMe and AHCI are available)
● Not fit AHCI disks like Samsung XP941, SM951 MZ-HPV256/512. (*SM951 MZ-VPV5120/2560 are supported for they’re NVMe)
● The caddy will heat up since NVMe produce a lot of heat

Tested NVMe:
‘M’ Key:
Samsung 950 Pro, PM951, PM961, PM981, SM961, 960 970 EVO Plus Pro, WD Black SN750, ADATA XPG SX8200 and SX6000 Pro, Corsair Force MP510, Crucial P1, Sabrent Rocket, Silicon Power P34A80, Intel 600P, 660P, 760P, 900P, Patriot, SK Hynix, Kingston KC1000, Mushkin Pilot, HP EX900, EX950, Pioneer APS-SE20G, addlink S70
‘B+M’ Key:
Kingston A1000, Corsair MP300, WD Blue SN500, Lexar NM520, Toshiba OCZ RC100, Intel Optane 800P, LITEON T11 Plus and NVMe pulled from notebook like Lenovo SL700, ST8000

Packaging:
1* ElecGear NV-i9 (102*40*9.9mm, 80gram)
1* USB A2C Cable (18-inch)
1* USB C2C Cable (7.5-inch)
1* I-shaped gasket
1* Thermal Pad
1* PH00 Screwdriver
(Internal Memory is NOT included!)

Raspberry Pi Armor Case  Raspberry Pi Metal Case With Dual Fan Aluminium Alloy Box Cooling Fan for Raspberry Pi 3 Model B

Item Description:

Material: Aluminum alloy  

Color: Black

Compatible with:  Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B

Features:Passive cooling architecture design can reach perfect heat dissipation. 

Features:

​Ultra-thin design

Easy to install

Fast Heat dissipation

Silence Fan without noise

Smooth and straight aluminum material

All ports and slots of the case can match with Raspberry Pi 3 Model B+ perfectly

Packing List:   

Aluminum alloy Case x 1pcs

Assembly screw x 1 set

Thermal silica x 1 set

Screwdriver  x 1pcs

Note: Raspberry Pi board is not included.

Kind reminder: There are 4pcs thermal silica in the packing. 2pcs thin thermal silica for Raspberry pi 3 Model B+ and other 2pcs thick thermal silica are for Raspberry pi 3 Model B.

The Altelix NF141208VFHA1 Heated and Vented Fan Cooled Weatherproof NEMA Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This rugged NEMA box is molded from durable and UV resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. It features a stainless steel continuous door hinge and stainless steel latches with provision for padlocks. The door is fully gasketed making this enclosure suitable for use indoors or outdoors.

Power
This model features a 2.5mm thick finished aluminum plate with two pre-wired 120VAC surge-protected power outlets. A terminal strip and ground lug are provided for simplified wiring on-site. In addition the mounting plate features a number of pre-drilled hole patterns for mounting popular wireless access points without any modifications.

Heater
This model also features a thermostat controlled 200W heating system. The heater turns on when the internal temperature reaches 43°F (6°C) and turns off when it rises to 59°F (15°C). The heater is situated below the mounting plate and wired internally so it does not interfere with user installed equipment or require the use of the AC outlets.

Cooling Fan Ventillation
This model also features dual 4″ vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets. Rain shrouds on the front door keep rain water from entering the enclosure and the internal aluminum mesh filters are removable for cleaning.

Mounting
Four removable stainless steel mounting feet are included so that the enclosure can be securely mounted to a wall or other structure. An optional pole mounting kit (model NMKS-300-08) is also available.

The Altelix NF141208VFA1 Vented Fan Cooled Weatherproof NEMA Industrial Equipment Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This rugged NEMA box is molded from durable and UV resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. It features a stainless steel continuous door hinge and stainless steel latches with provision for padlocks. The door is fully gasketed making this enclosure suitable for use indoors or outdoors.

Power
This model features a 2.5mm thick finished aluminum plate with four pre-wired 120VAC surge-protected power outlets. A terminal strip and ground lug are provided for simplified wiring on-site. Three cable glands are provided, one for the AC supply along with two for low voltage wiring. The cable glands can be used with cable ranging from 0.100″ to 0.300″ in diameter. In addition the mounting plate features a number of pre-drilled hole patterns for mounting popular wireless access points without any modifications.

Cooling Fan Ventillation
The NB141208VFA1 features dual 4″ gasketed vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures by expelling hot air from the enclosure. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure, and the internal aluminum mesh filters are removable for cleaning.

Mounting
Four removable stainless steel mounting feet are included so that the enclosure can be securely mounted to a wall or other structure. An optional pole mounting kit (model NMKS-300-08) is also available.