The Best Dash Kit 1997 K1500

Double DIN Installation Dash Kit for Select 1990-Up GM Vehicles

The dash kit is designed to create a single din opening in the center of the truck/suv below the a/c vents. The dash kit is designed specifically for your vehicle, it lines up with factory mounting to install and uninstall easily. There are no modifications necessary. The Pocket kit mounts where the factory radio is removed from to create storage. Install your aftermarket radio without cutting your factory dash wires with this color coded aftermarket wire harness that plugs into the back of your aftermarket radio then can be wired into the dash by matching up like colored wires. The antenna adapter is used to adapt the factory antenna end to the standard Motorola male end need to plug in to your new aftermarket radio. This plug may not work if you have installed an aftermarket antenna, as most of those do not require adaptation. There are no modifications necessary. Chevrolet Vehicle Fitment: Crew Cab Dually 1992-1994 Full Size Blazer 1992-1994 Full Size Pickup 1988-1994 Suburban 1992-1994 Kodiak 1994-1996. GMC Vehicle Fitment: Crew Cab Dually 1992-1994 Full Size Pickup Sierra 1988-1994 Suburban 1992-1994 Yukon 1992-1994

Installation Kit for Select 1995-2005 GM/Chevrolet Full-Size Trucks

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( $175 ), an aftermarket radio install dash kit ( $12 ), wiring harness and a antenna adapter ($6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). Installation Directions- Tools needed for install – Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as $3.99 and a Dremel (rotary tool) knock off for $10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and the radio will be lose and ready to come out.. Keep the screw for installation of new double din radio.. Step 3: Next unplug all the wire harness and antenna cable leading into the factory radio. You will now have the empty hole ready for new double din radio and your newly purchased dash kit (DO NOT DISCARD THE FACTORY BEZEL AS YOU WILL NEED THE AC VENTS TO PUT ON THE NEW BEZEL) Step 4: The removal of the AC vents from the factory bezel.

Metra 99-4544 Dash Kit For GM Multikitwith Eq Opt 82-04

Install a new double-DIN radio in select 1999-02 full-size GM trucks and SUVs. Turbo kits let you install an aftermarket radio in your vehicle’s factory dash opening, while making the installation look as clean and professional as the OEM radio. They are uniquely designed to provide the right combination of strength, appearance and versatility. They are the industry standard for installation kits… often copied, never duplicated. When installing your stereo, don’t settle for less than Metra. Turbokit Features: High impact, OEM quality, ABS plastic construction Whenever possible, Turbo kits mount to the factory radio mounting locations. This provides an easy install with strength. Turbokit radio openings will hold either DIN or ISO DIN units and, where there is enough room in the dash, some of Metra’s Turbo kits will accommodate 2 ISO mount units or 1 Double DIN unit. Snap-in ISO mount radio supports hold any ISO style radio secure; just screw them to the side of the ISO mount unit and snap it into the opening. If the radio needs to be removed, use a flat blade screwdriver to release the snap tab and out slides the radio. Under radio storage pockets are provided where possible. They are full depth pockets that hold plenty of stuff. Very functional! Turbokits have been designed with exacting tolerances, so they match the factory dash contours perfectly. There are never any gaps between the dash and the kit. ISO trim rings are provided for a custom looking install Includes: Dash-panel 2 Brackets 8 Clips Installation Instructions

Applications
Cadillac
Escalade 1999-2000
Chevrolet
CK Pickup 1995-2000
Silverado 3500 1999-2000
Silverado 3500 (chassis cab) 2001
Suburban 1995-1999
Tahoe 1995-1999
GMC
CK Pickup 1995-1998
Sierra 2500 1999
Sierra 3500 1999-2000
Sierra Classic 1999-2000
Sierra HD 2001-2002
Suburban 1995-1999
Yukon 1995-1999
Yukon Denali 1999-2000

Single din install dash kit for select 1992-up Chevrolet, Cadillac and olds mobile vehicles. Kit includes: radio housing, radio housing trim plate, & radio housing brackets. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.

Product Features:
10ft wiring harness, 2 sets of connectors to light fixtures
illuminated on/off toggle switch – can easily turn on/off the lights.
Inline blade fuse & relay – multiple safety protection.
Note:
Maximum Wattage: 180W; Max Ampere: 15A
Operating Voltage: 12V DC Power
Please finish the installation by professionals or install the wiring harness under the guidance of professionals.

Wire Harness to Connect an Aftermarket Stereo Receiver to Select 1988-2005 GM Vehicles. Designed specifically to fit the compatible vehicles. Plugs into the factory harness without cutting any wires. Made from OEM quality materials.