Top 10 Deep Vacuum Pump

Vacuum bagging is a great method for building a better composite part. This Starter Kit contains the essential tools and hardware to let you get it started. Vacuum Bagging Hardware and Starter Kit: with Deep Vacuum pump Bagging Material, Vacuum Gauge, Vacuum Nipple and Other Hardware for a easy setup for Epoxy and the alike infiltration in Workshops VIOT model: VPD6: 2 stage High Performance Deep Vacuum Pump, 25-MICRON; 6.0 CFM, 1/2 HP 110VAC/60Hz motor. View a demo and review by a customer at: https://www.youtube.com/watch?v=eHyAhXMj8cc This Sale include: Pump, vacuum gauge with a Tee adapter, vacuum hose with a barbed adapter, bagging nipple(chuck or adapter) for a tight seal. SPECIFICATIONS OF THE PUMP: POWER SUPPLY: 110 VOLTS PUMPING RATE: 6.0 CFM POWER: 1/2 HP INTAKE PORT: 1/4 inch male SAE, and 3/8 inch Male SAE flare, include an adapter to 1/2 ACME MAX VACUUM: 25 MICRONS DIMENSIONS: 305(L) x 132(H) x 240(W) OIL CAPACITY: 450 ml WEIGHT: 28 lbs SPECIFICATIONS OF THE VACUUM GAUGE: Construction: SS case on a brass frame; Size: 2.5-inch in diameter, large face; 2.0 inch over all depth Range: from 0 to -30″ Hg or -100 kPa scales in range; Connection: straight 1/8″ NPT male brass, on back center of the gauge body; 5% accuracy on the full scale; plus a Tee adapter(1/4 X 1/4 X 1/8) to 1/4″ SAE Flare port; SPECIFICATIONS OF THE VACUUM CHUCK(NIPPLE) AND BAG SHEET: Straight solid brass structure with 1/2 multi Barbed connector to hose/tubing, no restriction with 1.6 inch over all height with matching rubber washer sealer and sealers needed for a tight connection; with matching large SS washer with bigger contact area to protect the film forming the bag With a 10 ft 1/2 ID 3/4 OD thick walled vacuum hose with 1 sheet of plastic bagging material: 6 mil thick stretchable punch resistent 60″ X 100″ Sold as one assembly unit PACKING LIST: Vacuum Pump with a Bottle of vacuum oil and Power Cord Vacuum Gauge with a Tee adapter Vacuum Gauge Chuck with 10 ft 1/2 ID vacuum hose

A good quality vacuum pump is an integral tool for complete A/C service. Mastercool vacuum pumps are durable and time tested. They stand up to the most grueling conditions and will provide years of reliable service. Mastercool offers a complete selection of pumps. Regardless of your service requirements, Mastercool has a model for your applications.

This model is the choice for medium sized and larger systems (5 lb. and above capacity). The 1/2 horsepower motor makes cold condition start up quick and easy. This two stage pump features a manifold valve to isolate it from the system and three inlet ports: 1/4” FL, 3/8” FL and 1/2” ACME (for automotive R134a systems).

Specifications:
• No. of Stages: 2
• Free Air Displacement: 7.5 CFM
• Ultimate Vacuum: 25 Microns
• Pump Motor: 1/2 HP
• Pump Speed: 1725 RPM
• Electrical Specs: 110 V/60 Hz
* PLEASE NOTE: The micron readings on all vacuum pumps represent optimal laboratory conditions. Field conditions may vary from these readings.

Uniweld’s U5VP2 Two Stage Vacuum Pump is for deep vacuum service on automotive, appliances, residential, and commercial HVAC/R systems. Features include: 5. 5 CFM 2-stage rotary vane design, 1/2 H. P. motor with dual voltage 110V/220V – 50/60 Hz power selector switch, factory micron rating of 15 microns, 1/4″ and 3/8″ male flare dual intake fittings with tethered caps, center mounted handle for balance, powerful low decibel fan cooled motor, heat dispersing motor fins, wide and stable metal base with non-skid rubber feet for durability and vibration control, wide mouth oil fill port and pump exhaust, 11. 1 oz. oil capacity, large sight glass for easy oil monitoring, an easy access oil drain plug.