The Best Dishwasher Parts Mounting Brackets

 DD94-01002A Dishwasher Assembly-Install Kit fit for Samsung Dishwasher Mounting Bracket.

This filter fits models:DMT400RHS/XAA,DW7933LRASR/AA-0001, DW80K5050US/AA-01,DW80F600UTS/AA-01,DW80F800UWS/AA-01,DW80F600UTW/AA-01,DW80J3020UB/AA-00,DW80J3020US/AA-00,DW80J3020UW/AA-00,DW80K5050UB/AA-00,DW80K5050UG/AA-00,DW80K5050US/AA-00,DW80K5050US/AA-02,DW80K5050US/AA-03,DW80K5050UW/AA-00,DW80K7050UG/AA-00.

Product Description:8269145 DishwasherMounting Bracket (2PCS)Mounting bracket to mount dishwasher to the bottom side of the countertop. Sold individually.

Compatible With brand : Amana Crosley Estate Inglis Jenn Air Kenmore Kitchen Aid Maytag Roper Whirlpool

Fits Models: Amana Crosley Estate Inglis Jenn Air Kenmore Kitchen Aid Maytag Roper Whirlpool

Please Note:The brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

How To Install: Insert the right corner of the bracket at a 45-degree angle into the slot on the top of the dishwasher. Swing the remaining corner of the bracket into the slot so the bracket is now parallel to the slot. Use pliers or a flat head screwdriver to bend the tab that is now on the backside of the slot to secure the bracket in place. Push dishwasher back into position under the counter. Use supplied screws to secure brackets to the underside of the wood countertop.

Part 8269145 comes in a pack of two. Mounting brackets secure the top of the dishwasher to the underside of a cabinet or countertop. If your dishwasher moves, shakes, or tilts forward, it may be time to replace one or both of the mounting brackets. The PartsBroz 8269145 bracket set fits and performs just like the original. Use it with a variety of top name brand dishwashers.

Installation Tips

Before beginning the repair, disconnect the dishwasher from its power source. Depending on the model, you may also need to disconnect the water supply. You’ll need a pair of needle nose pliers and a screwdriver to complete the repair. Make note that brackets typically wear down at the same rate, so be sure to check both brackets and replace both if needed.

Replacing your dishwasher’s mounting brackets is a simple way to get your dishwasher running like normal.

Have any of these problems? These brackets can help:

• Door won’t latch shut
• Door won’t close
• Noisy dishwasher

Part 8269145 is a functional equivalent for part numbers: 8269145, WP8269145, AP3039168, PS393134, 830941, AH393134, and EA393134.

Compatibility

It works with top dishwasher brands and many of their models. These include:

• Whirlpool
• KitchenAid
• Kenmore
• Maytag
• Jenn-Air
• Amana
• Estate
• Magic Chef
• Inglis
• Crosley
• Roper

Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number for your dishwasher.

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.

FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.

INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.

WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws

100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item

What’s This：8212560 Dishwasher Side Mounting Bracket Kit(includes mounting brackets and screws)

REPLACE PART NUMBER: 1201084,AP3953705,8212560

FitModel:[Kenmore]-66512093K210,66512413N410,66512413N411,66512413N412, 66512723K310, 66512723K311, 66512833K311, 66513013K111, 66513014K113, 66513023K110,66513032K114,etc.[Whirlpool]-7GU2300XTVQ0,7GU2300XTVQ1,7GU2300XTVQ2,7GU2300XTVQ3,7GU2300XTVS0,7GU2300XTVS1,7WDF530PAYM3,7GU3800XTVY6,7WDT790SAYM2, etc.

NOTE: The brands mentioned above are their own and are mentioned here only to prove compatibility.

Genuine Original Equipment Manufacturer (OEM) parts! This mounting bracket kit (part number 00619985) is for dishwashers. Mounting bracket kit 00619985 secures the dishwasher to the counter. Unplug the dishwasher or shut off the house circuit breaker before installing this part. Wear work gloves to protect your hands. For Bosch & Thermador.