Top 10 Dishwasher Test Strip

These strips are accurate to ± 2° F. Place these strips securely to the dishwasher rack and the thermocromatic color change band will verify that the proper sanitizing temperature is reached during the washing operation.Model #: 8767J For use with dishwashers Thermocromatic color‐change band verifies proper sanitizing Strip can be removed, signed, dated and saved Comply with FDA 160° F / 72° C minimum required temperature Accurate to ± 2° F 103924

Chlorine / Bleach Test Paper three pack
This Chlorine Test Paper provides a simple, reliable, and economical means to measure the concentration of free available chlorine in sanitizing solutions. The Chlorine Test Paper measures total available chlorine from 10-200ppm and gives results in just seconds. Total available chlorine is the sum of free available chlorine and the combined available chlorine. Our chlorine test paper is most often used to test the strength of solutions used to sanitize surfaces, for example, in the restaurant industry. In these types of applications, bleach is usually used to generate the available chlorine.

When using bleach as a cleaner, it must be diluted before use, and it will work best in the pH range of 5-7.

Instructions:

1. Use dry fingers to remove a chlorine test paper strip from the vial.
2. Dip the test strip into the solution to be tested, and do not agitate.
3. Remove and compare to the color chart immediately.

NOTE: The strip will darken over time, so it is best to compare to the color chart as directed. In addition, if two strips are stuck together, the color will be darker. Lastly, if you lay the strip against the vial when comparing to the color chart, it will also darken the color. The color chart was created by holding a strip in the air next to the vial.

IMPORTANT NOTE: This strip was designed specifically for restaurants to test chlorine sanitizers in three part sinks. It will work for testing anything in the range of 10-200 PPM. IT WILL NOT work for testing tap water, pool water, undiluted bleach, or anything that uses Quaternary Ammonia as the active ingredient. If you have questions about your application, please message us and one of our experts will be happy to help!

4 X VIALS OF 100 EACH – Chlorine Sanitizing test strips for restaurants by the FryOilSaver Company 
These are the ideal Chlorine test strips for food service 

Chlorine Test Paper provides a simple, reliable, and economical means to measure the concentration of Chlorine Sanitizer solutions. 

With color matches at 10, 25, 50, 100, 200 ppm (parts per million), the test paper measures concentrations between 0 to 200ppm, detecting exhaustion of solutions that should be replaced as well as helping to avoid using excessive amounts of sanitizing agents.

Chlorine Test Paper is used to detect the strength of available chlorine in sanitizing solutions.. Federal, State and Local health regulations require users of chlorine based sanitizer solutions to have appropriate test kits available to verify the strength of sanitizer solutions.  

A PACK OF 4 X VIALS OF 100 easy to use pre cut strips made of plastic, preventing you from having to touch any chemicals for tests and stained fingers.  

Instructions:  
1. Remove a test paper from the vial, being careful not to touch the strip anywhere other than where you grasp it with your fingertips. 
2. Dip about 1 inch of test paper into the solution to be tested for 1 second. 
3. Compare immediately to the color chart. 
 

NOTE: The test strips should be kept in closed vials when not used, out of direct sunlight, at room temperature. 
IMPORTANT NOTE: This strip was designed specifically for restaurants to test chlorine sanitizers in three part sinks. It will work for testing anything in the range of 10 to 200 PPM. IT WILL NOT work for testing tap water, pool water, undiluted bleach, or anything that uses Quaternary Ammonia as the active ingredient

These strips are accurate to ± 2° F. Place these strips on any dry item and place it in the dishwasher. The thermocromatic color change band will verify that the proper sanitizing temperature is reached during the washing operation. Complies with FDA 160° F, 170° F, and 180° F.Model #: 8769 Accurate to ± 2° F FDA approved 27 labels per pack 988877

Thermostrip is a self-adhering and waterproof color-changing label that measures the surface temperature of dishware in the dishwasher. Using the thermostat on a dish surface with each wash cycle will provide a record that the proper sanitizing temperature has been reached. Label is tough enough to handle the extreme conditions existing in commercial dishwashers. Red color makes the label easy to find. Label changes permanently from white to black indicating temperature was reached. This flexible label allows usage at all three temperatures. Accurate to within 2°F. May be saved as a record of sanitizing temperature. Label Size 1/2″ x 1″. 3/4″.

This kit is a combination of two of our most popular tests for commercial kitchens – Our Fast Formula Quat Test and our Sanitizer Chlorine Test. These two tests are sometimes used in the same kitchen for different purposes and we want to make sure we are helping those customers with their needs. Each package comes with one bottle of Chlorine / Bleach Test Paper and one bottle of QAC test paper.
This kit is for people who use BOTH sanitizers, if you only use one type of sanitizer this is NOT the product for you. Easy to follow instructions are printed on the bottles.
The Quat Strips are guaranteed to accurately test: OASIS 146, Hyamine 35, Bardac 2250, Sysco (tablets).
NOTE: The strip will darken over time, so it is best to compare to the color chart as directed. In addition, if two strips are stuck together, the color will be darker. Lastly, if you lay the strip against the vial when comparing to the color chart, it will also darken the color. The color chart was created by holding a strip in the air next to the vial.

IMPORTANT NOTE: The chlorine strip was designed specifically for restaurants to test chlorine sanitizers in three part sinks. It will work for testing anything in the range of 10-200 PPM. IT WILL NOT work for testing tap water, pool water or undiluted bleach. If you have questions about your application, please message us and one of our experts will be happy to help!