We spent many hours on research to finding electric range outlet, reading product features, product specifications for this guide. For those of you who wish to the best electric range outlet, you should not miss this article. electric range outlet coming in a variety of types but also different price range. The following is the top 9 electric range outlet by our suggestions
848 reviews analysed
1. Coleman Cable 90448808 09044 Range Power Cord 4-Foot
Feature
- HEAVY DUTY 50-Amp range appliance power supply cord with ¼-inch flanged terminals
- Compatible with most standard free standing electrical ranges with a 4 conductor wall outlet
- ERGONOMIC, 4 pronged, flat plug lays flat against the wall so that range can be pushed back against the wall
- 125/250-Volt SRDT Cord with (2) 6-Gauge and (2) 8-Gauge copper conductors
- UL LISTED
Description
Product Description
Coleman Cable 09044 4-Foot 50-Amp 4-Wire Range Power Cord. Right-angle plug allows installation closer to the wall. 4-prong plug. 50-Amp. 4-feet long wire with strain relief bracket to ensure safe installation. Meets electrical requirements. If you have immediate questions about application, installation, troubleshooting, or a damaged component, please call CCI Consumer product hotline at 1-800-561-4321 or email questions to: [email protected]. The Coleman Cable (R) brand is a registered trademark of Coleman Cable Inc.
From the Manufacturer
Coleman Cable 09044 4-Foot 50-Amp 4-Wire Range Power Cord. Right-angle plug allows installation closer to the wall. 4-prong plug. 50-Amp. 4-feet long wire with strain relief bracket to ensure safe installation. Meets electrical requirements. If you have immediate questions about application, installation, troubleshooting, or a damaged component, please call CCI Consumer product hotline at 1-800-561-4321 or email questions to: [email protected]. The Coleman Cable (R) brand is a registered trademark of Coleman Cable Inc.
2. Eaton WD1212 50-Amp 3-Pole 4-Wire 125-Volt Surface Mount Range Power Receptacle, Black
Feature
- Features heavy galvanized steel and mounting strap to resist corrosion.
- Patented lay-in terminals accept up to #4 AWG
- Back features concentric knockouts and an adjustable cord clamp to allow wiring from back and bottom
- Features 3-Pole/4-Wiring with a Nema Standard of 14-50R with 125/250 Voltage. Total Outlet: 1
- To be used with aluminum or copper wiring
Description
The Eaton Wiring Device WD1212 50-Amp 125-Volt Surface Range Power Receptacle has a heavy duty design and construction that is ideal for any high amperage industrial and commercial power connectivity application. This surface receptacle features heavy gauged galvanized steel mounting strap and a glass reinforced nylon body. This heavy-duty non-grounding application has 3-Pole/4-Wire features and a NEMA standard of 14-50R with 125/250-Voltage. This surface receptacle has a patented lay-in terminal that allows it to except wire up to #4 on the American Wire Gauge (AWG). Its back features concentric knockouts and an adjustable cord clamp to allow wiring from the back and bottom to fit your convenience. It is to be used with aluminum or copper wire. Eaton is a trusted name in electrical products. Eaton is committed to providing products that increase productivity, energy efficiency, safety at work and in the home, and produce reliable performance. Whether a home-Feets style is traditional, modern, casual, cozy or rustic, it will demand more from wiring devices than in years past. Eaton is dedicated to providing the up-to-date wiring device solutions that today-Feets homes need.
3. ENERLITES 50 Amp Outlet for Dryer/Stove/Oven/Range, Generator, RV, Electric Vehicles (Tesla, Toyota, Honda, Chevy) | 66500 NEMA 14-50R, Indoor/Outdoor, 125/250 Volt, 3P 4W, Female Plug, Black
Feature
- Quality: Proven High-Quality build over years of testing, customer records and Amazon reviews the impact resistant, thermoplastic body protects the black dyer outlet from wear over time in all applications
- 14-50r assures compatibility with (EV) Electric Vehicles (please see your manufacturer’s manual for compatibility) as well as electrical dryers, Ranges, welders and a broad range of other applications. Fits all 1-gang wallplates. We highly recommend the installation of this dryer outlet with a 2 gang wall plate to make the installation process easier with more space.
- Specifications: 50 Amp, 125/250 Volt, UL Listed, Environmental UL94 Flammability, V2 Rating, Industrial Grade, Straight Blade, Grounding, Zinc-Plated Steel Strap for corrosion resistance and a Black Outlet made of Heavy Duty Thermo-Plastic material
- Wiring: Only accepts 8, 6, and 4 gauge Copper Wires (AWG), Neutral wire is required and can be applicable to 125V or 250V applications and up to 50 Amps
- Easy installation: Fits in BOTH single and 2-Gang box styles, terminals marked for easy identification and fast wiring, all mounting hardware included. For wallplates for this 50 amp outlet, please select the option for “2 Gang – Wallplate, Midway” above
Description
ENERLITES Reliability
High-Quality, proven longevity, reliable brand.
From ENERLITES, one of America’s Leading Commercial Brands
Longer and safer power with our quality and UL Listed items.
Nationwide over ever state and internationally in Canada and Mexico.
14-50R
Compatible with electrical dryers, welding systems, and electrical vehicles
Heat Resistant
Environmental UL94 Flammability
V2 Rating
Matte Finished
Enhances grip and doesn’t leave smudges or fingerprints
In the box
ENERLITES 50 Amp 250 Volt Dryer Receptacle
All included screws
Instruction Manual
All included hardware for proper installation
For Ideal Use:
Use with electrical dryers in laundry mats or home. With welding systems that require a 50 Amperage outlet or with electrical vehicles that also require a 50 Amperage connection (please see your Vehicle Manufacturer’s manual to make sure that it require’s a 14-50R Receptacle/Outlet for Charging/Powering of your (EV) Vehicle(s). Can be installed indoors or outdoor with covered protection. Use with Copper Wire 8, 6 or 4 (AWG). The outlet is Industrial Grade and UL Listed to the United States.
4. Leviton 279-S00 50 Amp, 125/250V, Nema 14-50R, 3P, 4W, Flush Mounting Receptacle, Straight Blade, Industrial Grade, Grounding, Side Wired, Steel Strap, Black
Description
Built of durable thermoplastic, Leviton Power Receptacles — come equipped with heavy-gauge, double-wire copper alloy contacts. To ensure correct and speedy wiring, terminals have ID markings. Flush mount receptacles fit Leviton’s wide range of 2.15″-diameter wallplates and mounting hardware is included. WARNING: Do not use with single-gang wallboxes, single-gang mud rings or single-gang box extenders.
5. RVGUARD 50AMP Female（14-50R）Replacement Receptacle, 125/250V, with Finger Grip (Black)
Feature
- Replace the damaged receptacle of the 50A RV extension cord, fits for 6/3+8/1 50A STW RV cord.
- cETL/ETL Listed. RVGUARD female plug housing is made of ABS with flame retardant and UV resistant Polycarbonate.
- Built with rubber bushing inside, sealed from moisture to some extent. Inner strain relief clip and outer bushing firmly secure cable.
- Equipped with finger grip handles, designing to make plug in and unplug easily.
- Following clear directions, you can easily attaches and reassembles the wires.
6. 3-Pole Flush Mount Industrial Grade Range Receptacle, Straight Blade, Black, Nema 14-50R, 125/250 Volts, 50 Amps
Feature
- Built of durable thermoplastic
- equipped with heavy-gauge, double-wire copper alloy contacts
- Terminals marked for easy identification and fast wiring
- Flush-mount devices fit single or two-gang outlet boxes
- 50 Amp, 125/250 Volt
- Fits all wallplates with 2.15″ diameter center hole
- Terminals marked for easy identification and fast wiring
- All mounting hardware included
- Flush-mount devices fit single or two-gang outlet boxes
- Easy-to-wire terminals accept up to No. 4 AWG conductors
Description
Product Description
Outfit your dryer with top-notch connections with a single-flush range receptacle. The 125-Volt/250-volt, 4-wire, 50 amp receptacle is UL listed and has robust, reliable dryer performance.
From the Manufacturer
Built of durable thermoplastic, Leviton Power Receptacles — come equipped with heavy-gauge, double-wire copper alloy contacts. To ensure correct and speedy wiring, terminals have ID markings. Flush mount receptacles fit Leviton’s wide range of 2.15″-diameter wallplates and mounting hardware is included. 50 Amp, 125/250 Volt, NEMA 14-50R, 3P, 4W, Flush Mounting Receptacle, Straight Blade, Industrial Grade, Grounding, Side Wired, Steel Strap, Black.
7. Leviton 5206-S10 50 Amp, 125/250 Volt, NEMA 10-50R, 3P, 3W, Flush Mounting Receptacle, Straight Blade, Industrial Grade, Non-Grounding, Side Wired, Steel Strap, Black
Feature
- Equipped with heavy-gauge, double-wire Copper alloy contacts
- Flush mount receptacles fit leviton’s wide range of 2.15”-Diameter wallplates
- To ensure correct and speedy wiring, terminals have ID markings
- Total_power outlets:1
- Warning: DO not use with single-gang wallboxes, single-gang mud rings or single-gang box extenders
- Use 2-gang wallplate (2.15″ opening) to complete installation
Description
Leviton 5206-s00 is built of durable thermoplastic, Leviton power receptacles — come equipped with heavy-gauge, double-wire copper alloy contacts. To ensure correct and speedy wiring, terminals have id markings outfit your dryer with top-notch connections with a single-flush range receptacle. The 3-wire, 50 amp receptacle is UL listed and allows for robust, reliable range performance.
8. Aweking UL Listed 50 Amp 50A Power Receptacle Outlet NEMA 10-50R,Industrial Power,125 Volt,250 Volt,nema 10-50r Receptacle,Straight Blade,Flush Mounti
Feature
- Heavy Duty:Industrial commercial grade shell keeps durable lifetime.Heavy-duty copper terminals fit for #10-#4 AWG wire.
- Wide Application:Common applications include range installations that need both 250V for the heating elements and 125V for the clock/controls/lighting,such as EV Electric Vehicle RV Recreational Vehicle charging station.
- Installation Design:Wiring or Soldering is available for the copper terminals.Side-screw mounnting fits many outlets boxes well. Concentric knockouts and an adjustable cord clamp to allow wiring from back or bottom.
- Rating: 125V/250V AC 50A
- Withstand Voltage: AC2500V 50/60hz last for 1min
- Type:NEMA 10-50R,2 Pole 3 Wire
- ATTENTION BEFORE BUYING:We provide different types of NEMA plugs,connectors and recertacles. Please check the device you want to replace the NEMA device.”P”,”C” or “R”,NEMA number ending with, are the key information for your choice.
Description
Specification:
Rating: 125V/250V AC 50A;
Withstand Voltage: AC2500V 50/60hz last for 1min;
Type:NEMA 10-50R,2 Pole 3 Wire;
Wiring Type: Soldering and wire;
Installation Way:Flush Mount.
Features
Heavy Duty:Industrial commercial grade shell keeps durable lifetime.Heavy-duty copper terminals fit for #10-#4 AWG wire.
Wide Application:Common applications include range installations that need both 250V for the heating elements and 125V for the clock/controls/lighting,such as EV Electric Vehicle RV Recreational Vehicle charging station.
Installation Design:Wiring or Soldering is available for the copper terminals.Side-screw mounnting fits many outlets boxes well. Concentric knockouts and an adjustable cord clamp to allow wiring from back or bottom.
9. Eaton WD112 50-Amp 125-Volts 2-Pole 3-Wire Surface Mount Range Power Receptacle, Black
Feature
- Features heavy galvanized steel and mounting strap to resist corrosion.
- Patented lay-in terminals accept up to #4 AWG
- Back features concentric knockouts and an adjustable cord clamp to allow wiring from back and bottom
- Features 3-Pole/3-Wiring with a Nema Standard of 10-50R with 125/250 Voltage
- To be used with aluminum or copper wiring
Description
The Eaton Wiring Device WD112 50-Amp 125-Volt Surface Range Power Receptacle has a heavy duty design and construction ideal for any high amperage industrial and commercial power connectivity application. This surface receptacle features heavy gauged galvanized steel mounting strap and a glass reinforced nylon body. This heavy-duty non-grounding application has 3-Pole, 3-Wire features and a NEMA standard of 10-50R with 125-250-voltage. This surface receptacle has a patented lay-in terminal that allows it to except wire up to #4 on the American Wire Gauge (AWG). Its back features concentric knockouts and an adjustable cord clamp to allow wiring from the back and bottom to fit your convenience. It is to be used with aluminum or copper wire. Eaton is a trusted name in electrical products. Eaton is committed to providing products that increase productivity, energy efficiency, safety at work and in the home, and produce reliable performance. Whether a home-Feets style is traditional, modern, casual, cozy or rustic, it will demand more from wiring devices than in years past. Eaton is dedicated to providing the up-to-date wiring device solutions that today-Feets homes need.
Conclusion
By our suggestions above, we hope that you can found Electric Range Outlet for you.Please don’t forget to share your experience by comment in this post. Thank you!
