528 reviews analysed
1. FoodSaver Repair Kit: Upper/Lower Gasket, Heat Strip Replacement 4 Foam Gaskets, 2 Strips Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers Replaces Food Saver T910-00075 by OutOfAir
Feature
- FIX THE SUCKING: If your FoodSaver is having a difficult time holding the vacuum while sealing, it’s likely that you just need to replace your gaskets! FoodSaver recommends replacing them annually.
- FIX THE SEALING: If your FoodSaver is having a difficult time sealing bags, the heating element tape is probably just worn out and needs to be replaced. However this will not fix a heating element that is not working at all. See product description for more details.
- INCLUDES: 4 Foam Gaskets & 2 Pieces of Replacement Teflon Tape with Adhesive Backing. If you have 1 Foam and 1 Rubber Gasket, only replace your FOAM gasket. Don’t remove the rubber gasket. If you have 2 foam gaskets, always replace both foam gaskets at the same time. Please see description for details on certain models.
- WORKS WITH: V2200, V2400, V2800, V3000, V3200, V3400, and V3800 Series FoodSaver models. Also works with: GameSaver Deluxe Plus and Vac 800 Series — V2200 Series: V2200, V2220, V2222, V2235, V2240, V2244, V2250, V2254, V2260 — V2400 Series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490 *** V2800 Series: V2820, V2830, V2835, V2840, V2860, V2865
- V3000 Series (Lower Gasket Only): V3020, V3040 *** V3200 Series(Lower Gasket Only): V3230, V3240, V3245, V3250 *** GameSaver Deluxe Plus
Description
Is your FoodSaver vacuum sealer having trouble holding suction while sealing? Our gaskets may be able to help. Our gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)
Works With These Models:
- V2200 Series
- V2000
- V2220
- V2222
- V2235
- V2240
- V2244
- V2250
- V2254
- V2260
- V2400 Series
- V2420
- V2430
- V2431
- V2432
- V2433
- V2440
- V2450
- V2460
- V2461
- V2470
- V2480
- V2490
- V2800 Series
- V2820
- V2830
- V2835
- V2840
- V2860
- V2865
- V3000 Series (Lower Gasket Only)
- V3020
- V3040
- V3200 Series (Lower Gasket Only)
- V3230
- V3240
- V3245
- V3250
- Others
- GameSaver Deluxe Plus
Is your machine having trouble sealing bags closed? If so, our replacement heat strip tape could help. Over time this tape can get worn out or dirty which can cause problems when the machine tries to seal the bags. Includes instructions for replacing the heat strip/tape.
2. 3 Teflon FoodSaver Replacement Strips for Vacuum Sealers – Fits FoodSaver, Rival Seal-A-Meal, Weston, Cabella’s and Nesco Models – Made in the USA
Feature
- Three 18-in long x 0.5″ wide Teflon strips with adhesive backing. Fit virtually all FoodSaver (TM) series, incl. 2000, 3000, 4000, 5000, GameSaver (TM) & Professional, and all Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) models
- Replaces deteriorated or burnt-out Teflon tape / PTFE tape, which is a crucial barrier between the heating element and the bag in your heat sealer machine. Old tape causes poor sealing and can lead to a broken heating element and a broken sealer
- Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect
- Ideal for virtually all FoodSaver (TM) models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston (TM) Pro 2100, 2300 and more
- Peel and stick backing – easy to apply. Simple-to-follow instructions included. Over the wire for vacuum sealers, under the wire for impulse sealers. Please note: This is an aftermarket replacement product (produced by Impresa Products). Trademark IMPRESA.
Description
(3) 18″ x 0.5″ IMPRESA Teflon strips with adhesive backing. Fit virtually all FoodSaver series, including 2000, 3000, 4000, 5000, GameSaver and Professional, as well as virtually all Weston, Cabella’s, Nesco and Rival Seal-A-Meal models. Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the vacuum bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer. Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect. Peel and stick backing makes our vacuum sealer tape easy to apply. Simple-to-follow instructions included with package. Over the wire for vacuum sealers, under the wire for impulse sealers. Great for Weston Pro 2100, 2300 and more. Perfect piece of the solution when looking for replacements for FoodSaver (TM) parts, FoodSaver (TM) teflon / teflons for FoodSaver (TM) / Food Saver (TM) teflon tape / FoodSaver (TM) teflon tape, Rival Seal A Meal (TM) parts, etc. This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) OEM product and Impresa Products has no affiliation with or endorsement from FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM). Our product is not covered under any FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) manufacturer’s warranty. The FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names and logos are the registered trademarks of their owners. Any use of the FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names, models or any other related designations are made solely for purposes of describing and illustrating compatibility.
3. Fuxury 12 inches Heat Seal Closer Impulse Sealer Accessories,2 Wire Elements and 2 Teflon Tapes,Length: 12 inches (300mm), Seal Width: 0.08 inch (2mm)(2 Repair Kits)
Feature
- 【Specifications】Sealing Length: 12 inch (300mm), Seal width: 0.08 inch (2mm).
- 【Used for 12 inch impulse heat sealer】Compatible with Fuxury brand 12 inch Impulse Manual Bag Sealer.
- 【Package Contents】2 wire elements and 2 Teflon Tapes(2 Replacement KIT ).
- 【Original accessories】Pls use original qualified spare parts from Fuxury, to ensure heat sealer reliability and permanence.
- 【Convenient replace】Easy to replace like the video display.
4. 12-inch Hand Heat Seal Closer Impulse Sealer Accessories Repair Kit Heat Elements PTFE Cloth Covers, 2 Pcs heating element+2 Pcs PTFE Cloth (width 4mm)
Feature
- The heating element is made of iron-chrome-aluminum heating alloy material with high resistivity, low resistance temperature coefficient, high use temperature, good corrosion resistance at high temperature, fast heating, durable and not easy to break.
- Heating element maximum operating temp: 1100 ℃ (2012 ℉).
- Heating element total length (including the connector): 338 mm (13.3 inch) , width:4 mm
- PTFE Cloth length: 310 mm (12.2 inch), width: 35 mm (1.37 inch).
- The repair kit is suitable for most 12″ manual pulse sealing machines, Heat Seal Closer Impulse Sealer
- Reminder: Please measure the length (including the connector) and width of the heating element that comes with your Impulse Sealer, making it easy to purchase matching heating elements. If you have any questions, you can contact me at any time.
Description
Complete Repair Kit ideal for 12″ Hand Impulse Sealer. Easy to replace and repair.
Includes upper PTFE cloth cover to protect the wire heat element, Ensure a perfect seal every time.
Repair Kit Package Content:
2 x Heating element
2 x PTFE Cloth
5. 3 Teflon Heat Tape Strips for Vacuum Sealers Fits FoodSaver, Weston, Seal-A-Meal, Cabelas, and Others (Made in USA) by OutOfAir
Feature
- FIX THE SEALING: If your FoodSaver is having a difficult time sealing bags, the heating element tape is probably just worn out and needs to be replaced. OutOfAir replacement Teflon tape is the highest quality available (Made in USA). Replacing your heat tape is recommended if it appears worn or you’ve run in to any problems with sealing.
- FITS ALL MACHINES: 3 Strips are each 18 inches long x 0.5 inches wide. These are purposely slightly longer and wider than necessary, simply trim length to fit your sealer model. The extra width gives you a bit more room to ensure proper coverage.
- PROTECT YOUR INVESTMENT: This tape is used to cover the heating element on your vacuum sealer machine. Worn out tape can cause problems when sealing, and could cause damage to your machine.
- WORKS IN ALL VACUUM SEALER MACHINES: OutOfAir replacement Teflon strips work in all vacuum sealers. Including FoodSaver, VacMaster, Weston, Cabelas, Rival, Seal-a-Meal, Ziploc and more.
- SAFE, CONVENIENT, RISK FREE: OutOfAir replacement strips are FDA Approved for direct food contact (-100 to 500F), and include a 60-day Money Back Guarantee.
Description
With normal usage the tape protecting the heating element in most vacuum sealers doesn’t need to replaced as often as the gaskets, but if you are having issues with your bags not staying vacuum sealed, you may want to consider replacing the tape as it can help with inconsistent sealing.
How Do I Install My Replacement Tape?
To install:
1) Simply remove the tape on your current heating element (make sure to get the residue from the old tape off).
2) Cut your new OutOfAir replacement tape to the correct size.
3) Remove the yellow backing from the tape and place over the heating element (under the element if using for an impulse sealer). Smooth out the tape with your finger as you go, to ensure a good bond.
And that’s it!
Will OutOfAir replacement tape work with my machine?
Yes it will. Works in all Vacuum and Impulse sealers that have a heating element for sealing bags.
For Vacuum Sealers you should place the tape directly over the heating element (after removing the current tape).
For Impulse Sealers you should place the tape directly under the heating element (after removing the current tape).
6. 2-Pack: 8" inch Impulse Sealer ???? Heating Element Service Spare Repair Parts Kit PFS-200 FS-200 PSF-200 PSF200 F-200
Feature
- Fits most, but not all, sealing machines advertised as “8 inch” machines
- Fits most, but not all, machines that have “200” as part of their model number (e.g. f-200, fs-200, pfs-200)
- 9.7 inches / 245 mm actual length from end to end. Wire is 2mm wide.
- Includes 2 replacement heating elements and 2 non-stick cloths
- No instructions included, but most machines require just a screwdriver for installation.
Description
This heating element fits most, but not all, impulse sealing machines that are advertised as “8-inch” machines or have “200” as part of their model number. Actual length of this heating element is 245mm / 9.7in. The coloring of the cloth varies a little from batch to batch. The ones you receive may be slightly darker or lighter in color. Dozens of manufacturers of these machines use the exact same model numbers but some machines do have some differences that make this heating element incompatible. If this does not fit your machine, please don’t leave a poor review as it still fits most machines. Instead consider leaving a review listing your brand and model of machine that it didn’t work with. You’ll be helping me out and your fellow shoppers to know which exact machines are not compatible. Thank you ????
7. Metronic 12-inch Heat Seal Closer Impulse Sealer Accessories,2PC thermal Fuse+2PC fever Cloth (12 inch)
Feature
- Complete Repair Kit ideal for 12″ Hand Impulse Sealer. Ensure a perfect seal every time.
- This replacement part comes with 2 wire elements & 2 cloth tapes
- Includes UPPER Teflon Cover to protect the wire heat element
- Proper Sealer Maintenance will extend sealer life & save transformer
- Easy to replace and repair!
8. PTFE Tape/Teflon Tape for Vacuum, Hand and Impulse Sealers (1/2-inch x 30 feet) – Fits FoodSaver, Seal A Meal, Weston, Cabella’s by IMPRESA
Feature
- 1/2″ wide x 30 foot long Teflon tape / PTFE tape roll with adhesive backing. Fits virtually all FoodSaver, Weston, Cabella’s, Nesco and Seal-A-Meal vacuum sealers, as well as most models of hand / impulse heat sealers
- Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer
- Tape may be slightly wider and longer than necessary, allowing for broad compatibility. Strip should be replaced when appearing warn, discolored or if sealing isn’t perfect
- Just peel tape from the roll and place on the correct area (you may need to clean the strip location before placing the new piece of tape). Over the wire for vacuum sealers, under the wire for impulse sealers
- Ideal for virtually all FoodSaver models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston Pro 2100, 2300 and more. By IMPRESA (TM)
Description
NEW Made in USA
9. 4-Pack FoodSaver Gasket Replacement – Vacuum Sealer Upper Gasket Assembly – Fits V2200, V2400, V2800, V3000, V3200, V3400, V3800 Models (Corresponds to Food Saver T910-00075) – By Impresa Products
Feature
- PERFECT REPLACEMENT: Perfect replacement for your FoodSaver (TM) Vacuum Sealer foam gasket for models with either 1 or 2 gaskets. Installing a FoodSaver (TM) gasket replacement helps improve suction and vacuum sealing performance when Foodsaver gaskets have deteriorated
- RETURNS SUCTION BACK TO 100%: Our replacement FoodSaver (TM) gasket fits all Food Saver V2200, V2400, V2800, V3000, V3200, V3400 and V3840 series models. Corresponds to FoodSaver (TM) part T910-00075. For those models with 2 gaskets, replace both at the same time for best results
- BUILT TO PERFORM AT A GREAT VALUE: Our gaskets are made from a purpose-specific, tighly engineered foam blend to ensure the highest quality level. What’s more, we provide you with a pack of four gaskets to ensure that you always have spares on hand and never have to forgo the use of your machine because the gasket is out of commission
- FITS MOST MODELS: Replacement for V2200 series (V2220, V2222, V2240, V2244, V2250 and others), V2400 series (V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490), V2800 series (V2820, V2830, V2835, V2840, V2841, V2860, V2865), V3000 series (V3020, V3040, etc.), V3200 series (V3240, V3250, etc.), V3400 series (V3420, V3425, V3430, V3431, V3440, V3460, V3461, V3485), V3800 series (V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, V3845, V3850, V3860, V3880)
- Note: This is an aftermarket replacement product meeting or exceeding the quality of OEM gaskets (based on in-house testing), produced by Impresa Products (TM). Not for use with non-FoodSaver (TM) vacuum sealers or FoodSavers (TM) with rubber gaskets
Description
TESTED, TRUSTED AND BACKED BY OUR TOP-RATED WARRANTY AND CUSTOMER SERVICE!
PERFECT REPLACEMENT: Perfect replacement for your FoodSaver (TM) Vacuum Sealer foam gasket for models with either 1 or 2 gaskets. Installing a FoodSaver (TM) gasket replacement helps improve suction and vacuum sealing performance when Foodsaver gaskets have deteriorated
RETURNS SUCTION BACK TO 100%: Our replacement FoodSaver (TM) gasket fits all Food Saver V2200, V2400, V2800, V3000, V3200, V3400 and V3840 series models. Corresponds to FoodSaver (TM) part T910-00075. For those models with 2 gaskets, replace both at the same time for best results
BUILT TO PERFORM AT A GREAT VALUE: Our gaskets are made from a purpose-specific, tighly engineered foam blend to ensure the highest quality level. What’s more, we provide you with a pack of four gaskets to ensure that you always have spares on hand and never have to forgo the use of your machine because the gasket is out of commission
FITS MOST MODELS: Replacement for V2200 series (V2220, V2222, V2240, V2244, V2250 and others), V2400 series (V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490), V2800 series (V2820, V2830, V2835, V2840, etc.), V3000 series (V3020, V3040, etc.), V3200 series (V3240, V3250, etc.), V3400 series (V3420, V3425, V3430, V3431, V3440, etc.), V3800 series (V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, etc.)
This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM) OEM product and Impresa Products (TM) has no affiliation with or endorsement from FoodSaver (TM). Our product is not covered under any FoodSaver (TM) manufacturer’s warranty. Brand names/logos are the registered trademarks of their owners. Use of the FoodSaver (TM) brand names, models, etc. are made solely for purposes of describing and illustrating compatibility
10. FoodSaver Upper and Lower Gasket Assembly Replacements (2 Foam Gaskets) – Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers (Replaces Food Saver T910-00075) by OutOfAir
Feature
- (ON SALE FOR A SHORT TIME ONLY) FIX THE SUCKING: If your FoodSaver is having a difficult time holding the vacuum while sealing, it’s likely that you just need to replace your gaskets! FoodSaver recommends replacing them annually.
- FOAM GASKETS: If you have 1 Foam and 1 Rubber Gasket, only replace your FOAM gasket. Don’t remove the rubber gasket. If you have 2 foam gaskets, always replace both foam gaskets at the same time. Please see description for details on certain models.
- WORKS WITH: V2200, V2400, V2800, V3000, and V3200 Series FoodSaver models. Also works with: GameSaver Deluxe Plus.
- V2200 Series: V2200, V2220, V2222, V2235, V2240, V2244, V2250, V2254, V2260 — V2400 Series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490 *** V2800 Series: V2820, V2830, V2835, V2840, V2860, V2865
- V3000 Series (Lower Gasket Only): V3020, V3040 *** V3200 Series(Lower Gasket Only): V3230, V3240, V3245, V3250 *** GameSaver Deluxe Plus
Description
Is your FoodSaver vacuum sealer having trouble holding suction while sealing? Our gaskets may be able to help. Our gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)
Works With These Models:
- V2200 Series
- V2000
- V2220
- V2222
- V2235
- V2240
- V2244
- V2250
- V2254
- V2260
- V2400 Series
- V2420
- V2430
- V2431
- V2432
- V2433
- V2440
- V2450
- V2460
- V2461
- V2470
- V2480
- V2490
- V2800 Series
- V2820
- V2830
- V2835
- V2840
- V2860
- V2865
- V3000 Series (Lower Gasket Only)
- V3020
- V3040
- V3200 Series (Lower Gasket Only)
- V3230
- V3240
- V3245
- V3250
- Others
- GameSaver Deluxe Plus
Conclusion
By our suggestions above, we hope that you can found Food Saver Heating Element for you.Please don’t forget to share your experience by comment in this post. Thank you!
