995 reviews analysed
1. TOPGREENER In-Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, 4A, 500W, Single Pole, Neutral Wire Required, TSOS5-W, White, 2 Pack
Feature
- 2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room
- AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
- Max Sensor Coverage Area 707 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%
- Occupancy sensor light switch features variable time delay from 15 sec (test mode) to 30 min
- *PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING*
Description
TOPGREENER TSOS5-W Passive Infrared In-Wall Motion Sensor Light Switch, you can enjoy great savings and convenience with lighting control. When you put the slide switch button to AUTO mode, TSOS5 PIR motion sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time. Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes.
Passive Infrared, PIR sensor detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. This occupancy sensor has a maximum coverage area up to 707 sq. ft., 180-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement.
With Top Greener’s TSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on in the day time even when motion is detected.
Use the TSOS5 as occupancy motion detector sensor, or set it to be in manual OFF or ON mode just like your standard ON/OFF.This operation can be done easily by sliding the sliding switch on the front of the motion sensor. TOPGREENER’s TSOS5 motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more!
Specifications: CFL/LED: 150-Watt @ 120 VACIncandescent/Halogen: 500-Watt @ 120 VAC Fluorescent: 500-Volt Amp @ 120 VACMotor: 1/8HP @ 120 VAC Coverage: 180 degrees, 707 square feet
Single-Pole use only Neutral wire required
2. LUTRON ELECTRONICS INC MS-OPS5MH-WH Maestro Occupancy Sensor Electrical Distribution Switcher, White
Description
Maestro, white, large room/Fan occupancy, sensor switch, single pole or 3 way, for 600W incandescent, halogen, elv or 450W MLV, or 360W compact fluorescent light or LED or 3a Fan, occupancy sensor switch automatically turns light on & off, proprietary technology ensures lights stay on when the room is occupied, senses daylight & only turns lights on when needed. The product is good to use. The product is highly durable.
3. TOPGREENER TDOS5-W Motion Sensor Light Switch, PIR Sensor Switch, Occupancy Sensor Light Switch, Motion Sensor Wall Switch, 500W 1/8HP, Neutral Wire Required, Single Pole, White
Feature
- Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room
- Motion sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
- Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
- Delay times: 15 sec (Test), 10 min, 20 min, 30 min. Adjustable range
- NEUTRAL WIRE REQUIRED, 1,200 square feet coverage, 180 Degree View
- 120VAC, 500W Incandescent, Halogen, Fluorescent, LED, CFL, Works with all bulb types. Single Pole Only. Wall plate included
Description
TOPGREENER TDOS5 combines occupancy and vacancy sensor into one light switch for energy efficiency, security and convenience, while in compliance with the 2011 NEC Code. When no motion is detected within delay time you set, the connected load will turn off automatically. This light sensor switch detects fine motion. Energy Efficiency: The motion sensor light switch automatically turns ON/OFF based on room occupancy, avoiding the waste of energy from leaving the lights/motors on when nobody is in the room, including bathroom, closet, hallway, and office. Running the TDOS5 consumes little power, est. cost only $1 a year. The sensor light switch automatically turns the light on to avoid blind-searching and tripping when entering a dark room. Enhances safety and security: Occupancy sensor switch can also effectively deter thieves and allow security cameras to capture clear footage. To conserve energy and prevent lights from automatically turning on during day time, all you need to do is adjust the light level knob to change the light sensitivity of the sensor. Operating modes: • Occupancy Mode: Light switch sensor will automatically turn on the lights when you enter a room and automatically turn off after the room is vacant, making it especially convenient when entering a room with your hands full. Perfect for many applications such as the kitchen, laundry room, garage, restroom, office, closet, etc. • Vacancy Mode: Requires manually turning the light on and automatically turns the light off when the room is vacant. Vacancy mode is used in rooms that do not need the lights to automatically turn on, such as bedrooms and media rooms. Vacancy mode provides the most energy savings as it ensures that the lights will automatically turn off when the room is no longer occupied. NEUTRAL WIRE REQUIRED
4. Lutron MS-A102-WH Maestro Dual Tech Occupancy Sensor Switch, no neutral required, 6 Amp Single-Pole, White
Description
Introducing Lutron’s latest sensing technology, the Maestro Dual Technology sensor enhances reliability by using both passive infrared and ultrasound technology to ensure optimal sensing performance for small rooms. Lutron’s XCT Dual Technology detects very fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently. To save additional energy, enable ambient light detection, which allows the sensor to learn your light level preference over time and adapt accordingly to keep lights off when there is enough daylight in the room. Maestro Sensors work with any bulb type, including CFLs and LEDs and will match the decor of any room in your home. Works with 6 Amps lighting/4. 4 Amps fan in single pole applications. Installing and setting up a Maestro in-wall, dual-technology occupancy sensor is a simple, easy and low cost way to save energy and add light automation to your home. Coordinating Claro wallplate and accessories sold separately.
5. GE Enbrighten Z-Wave Plus Smart Motion Sensor, Table, Shelf, or Wall Mount, On/Off after No Motion is Detected, 180 Degree Detection Range, Scene Activation, Works with SmartThings, Wink, 34193
Feature
- Requires a Z-Wave certified gateway – Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, Nexia, Trane and Iris.
- Wirelessly activate scenes or lights and send alerts to your smartphone or tablet whenever motion is detected.
- Sensor sits perfectly on a shelf, table counter or desk, and can be mounted to a wall or ceiling using the included mounting hardware – can be placed up to 150 feet from the Z-Wave hub or closest Z-Wave device
- Covers an 180 degree range and can detect motion from up to 45 feet away – three (3) adjustable motion sensitivity levels for small or large rooms/areas ( low / medium / high )
- Two Power Options – Powered wirelessly by two (2) CR123A batteries (included) for a battery life of up to 2 years or can be powered via micro USB cable and power adapter (cable and adapter sold separately) recommended for high-traffic areas like entry-ways, common rooms, and hallways
Description
Make the move toward convenience with the GE Battery-Operated USB Power Tabletop Motion Sensor with Wall Mount for your home. It sits perfectly on a shelf, table, counter or desk, and can also be mounted to wall or ceiling. Once you decide on the best sensor placement for your home, you may choose to power the sensor using the included batteries for a cordless installation or use a separate micro USB cable and AC power adapter. Never worry about changing batteries again.
6. TOPGREENER Motion Detector Sensor Light Switch, Occupancy Vacancy Modes, 4A, 500W 1/8HP, Wall Plates Included, Neutral Wire Required, TDOS5, White, (Pack of 2)
Feature
- 2-pack motion sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room
- Sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
- Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
- Light switch sensor features adjustable settings
- variable time delay from 15 sec (Test) to 30 min
- adjustable range
- NEUTRAL WIRE REQUIRED, 314 square feet coverage, 180-degree field of view
- 120VAC, 500W incandescent/halogen, 250W CFL/LED, 1/8HP motor
- single pole only
- 2x wall plates included
- CA Title 20 & 24 compliant
- UL listed
- 1-year
Description
TOPGREENER TDOS5 Motion Sensor Switch automatically turns lights and motors on and off according to the motion (occupancy/vacancy) detected in the room. There are two modes: Occupancy (OCC) and Vacancy (VAC) modes. In occupancy mode lights are automatically turned on when you enter a room and automatically turned off after the room is vacant. This is especially convenient when entering a room with your hands full, such as an entryway, laundry room, garage, etc. Avoid fumbling in the dark for the light switch or tripping when entering a dark room. Having the lights automatically turn on will deter thieves and allow a surveillance camera to capture clear footage. Use OCC mode for the kitchen, laundry room, garage, restroom, office, closet, etc. Vacancy mode is another option to choose from, which requires manually turning the light on and automatically turns the light off when the room is vacant. VAC mode is used in rooms that do not need the lights to automatically turn on, such as bedrooms and media rooms. This ensures the most energy savings because the user decides when to turn the lights on. The TDOS5 sensor switch provides reliable performance. When no motion is detected within the set time delay the load will turn off automatically. The PIR sensor switch’s visually aesthetic design and broad compatibility make it a good choice for you to upgrade your home. Variable time delay from 15 seconds to 30 minutes allows users to choose their preferred option. This occupancy sensor switch is only for single pole use. A neutral wire is required for installation.
7. (Pack of 2) White Motion Sensor Light Switch – NEUTRAL Wire Required – Single Pole Only (Not 3-Way) – For Indoor Use – Vacancy & Occupancy Modes – Title 24, UL Certified – Adjustable Timer
Feature
- NEUTRAL WIRE REQUIRED: This motion sensor requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Lights will flash if not correctly connected. Please review your wiring setup prior to purchase. If you have any doubt, please consult with a licensed electrician.
- SAVE ON ELECTRICITY BILLS: This dual purpose vacancy and occupancy wall switch sensor provides optimal management of lighting and a choice of either Manual-On (Vacancy Sensor) or Automatic-On (Occupancy Sensor) switching. These sensors are engineered to ensure that lights will turn ON manually or automatically and turn OFF automatically when motion is no longer detected within range. This saves energy, provides convenience and lowers electric bills.
- ADJUSTABLE SENSITIVITY WITH WIDE FIELD OF VIEW: The motion sensor covers 180°, so all motion is detected. There’s no need to wave your hands at the sensor. Sensitivity can be adjusted, so the lights won’t switch off at inconvenient times.
- 100% MONEY BACK GUARANTEE: We stand behind the quality and utility of this light switch. If you aren’t completely satisfied with it, for any reason at all, simply send it back to us for a full refund – no hassles, no delays and no questions asked.
- FULLY CERTIFIED AND COMPLIANT: UL Certified, FCC Listed and California Title 24 Compliant.
8. Sensor Switch WSX PDT WH LED wall switch occupancy sensors, Single Relay, White
Description
The WSX family of wall switch occupancy sensors provides simple and cost effective solutions for commercial and residential lighting control applications. All WSX family sensors have a stylish low profile appearance, soft-click buttons, and provide small motion detection up to 20 ft. , making them perfect for private offices, private rest rooms, closets, copy rooms, or any other small enclosed space.
9. Sensor Switch CMR PDT 10 Extended Range, Dual Technology Ceiling Mount Occupancy Sensor, White
Description
Classrooms and larger spaces are conveniently controlled by the CMR PDT 10 Series Extended Range occupancy sensor. Even when classrooms are filled with shelving, hanging projects, or lab benches; the CMR PDT 10 provides total coverage. When mounted at 9 ft. this sensor provides line of sight PIR detection up to 28 ft. in all directions and combines overlapping Microphonics for detection around obstructions. These attractive ceiling mount sensors are perfect for large restrooms and are an ideal solution for retrofitting classrooms with concrete ceilings.
10. Lutron MS-OPS2HW-WH Maestro 2-Amp Occupancy Sensing Switch, White
Feature
- Automatically turns the lights on when you enter the room and off when you leave
- Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
- Optional: senses daylight so lights do not turn on when there is enough natural light in the room
- Programmable time out of lights 1, 5, 15 or 30 minutes
- Works with all bulb types
- up to 250 Watt incandescent, halogen, electronic low voltage 200 Watt magnetic low voltage 150 Watt CFL/LED 2 Amp ballasts
- Single pole only
- great for small rooms like kitchens, laundry rooms and closets
- Installs in as little as 15 minutes
- ground wire is required, no neutral required
- Includes (1) Maestro sensor switch and (1) coordinating wallplate
Description
Product Description
Let Lutron’s Maestro Occupancy Sensing switch turn the lights on and off for you. It’s a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro Sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor features XCT Sensing Technology which detects minor motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, you can customize your sensor to detect daylight so lights don’t turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the décor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids’ rooms and never worry about lights being left on by mistake. Maestro Sensors works with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor. Coordinating Claro screwless wallplate is included. Click on “Watch the Demo” under the product image to learn how to customize the settings of your sensor and for other helpful videos.
Amazon.com
Conserve energy and automate the lights in your home with the Maestro occupancy sensor switch from Lutron Electronics. This wall-mounted switch automatically turns the lights on when you enter the room and turns them off after you leave. It’s a great convenience when your hands are full and you can’t reach the light switch, and it means you never have to worry about leaving the lights on by mistake. This version of the Maestro occupancy sensor switch is ideal for small rooms such as laundry rooms, closets, or bathrooms.
|
This sensor automatically turns the lights on when you enter the room–great when your hands full and you can’t reach the light switch (click each to enlarge). |
Detects Fine Motions to Keep Lights On
The Maestro occupancy sensor switch features proprietary Advanced XCT sensing technology, which detects fine motions such as reading or working at a desk. This ensures that the lights do not turn off inadvertently when the room is occupied. The switch reliably senses motion up to 30 feet away for up to 900 square feet of coverage. In addition, it’s designed to learn your personal light preference based on your use of the product.
Senses Daylight to Turn On Only When Needed
The Maestro occupancy sensor switch is equipped with patented ambient light detection that can identify when daylight is in the room. As a result, the switch only turns the lights on when they’re needed.
Elegant Design to Complement Your Home Décor
Keeping the sleek design of the Maestro family, Lutron sensors are made to match the décor of any room in your home. The Maestro occupancy sensor switch is available in four colors: Almond, Ivory, Light Almond, and White.
Optional Vacancy Mode with Manual On
The Maestro occupancy sensor switch can also be switched to vacancy mode, in which you manually turn the lights on when you enter a room and a sensor automatically shuts the lights off when the room is vacant. Vacancy mode is great for bedrooms, kids’ rooms, or rooms with pets.
Compatibility and Installation
The Maestro occupancy sensor switch works with all bulb types, including incandescent, halogen, and electronic low voltage bulbs up to 250 watts; magnetic low voltage bulbs up to 200 watts; CFL and LED bulbs up to 150 watts; and 2 amp magnetic/electronic ballasts. No neutral wire is required. This product is for single-pole applications only.
About Lutron Electronics
Lutron Electronics, headquartered in Coopersburg, Pennsylvania, designs and manufactures lighting controls and automated window treatments for residential and commercial applications. Lutron products save energy and make light bulbs last longer, making them an addition to the home and office. Lutron estimates that the installed base of its products saves the nation nearly 10 billion kWh of electricity, or approximately $1 billion in utility costs per year.
What’s in the Box
One Maestro occupancy sensor switch and Claro screwless wallplate.
#productDescription {color: #333333;word-wrap: break-word;font-size: small;line-height: initial;margin: 0.5em 0px 0em 25px;}#productDescription_feature_div > h2.default {color: #CC6600;font-size: medium;margin: 0 0 0.25em;}#productDescription_feature_div > h2.books {color:#333 !important;font-size:21px !important;line-height: 1.3;padding-bottom: 4px;font-weight: normal;margin: 0px;}#productDescription_feature_div > h2.softlines {color:#333 !important;font-size:21px !important;line-height: 1.3;padding-bottom: 4px;font-weight: bold;margin: 0px;}#productDescription > p, #productDescription > div, #productDescription > table {margin: 0 0 1em 0;}#productDescription p {margin: 0em 0 1em 1em;}#productDescription h3 {font-weight: normal;color: #333333;font-size: 1.23em;clear: left;margin: 0.75em 0px 0.375em -15px;}#productDescription table {border-collapse: inherit !important;margin-bottom: 0;}#productDescription table img {max-width: inherit !important;}#productDescription table td {font-size: small;vertical-align: inherit !important;}#productDescription ul li {margin: 0 0 0 20px;}#productDescription ul li ul {list-style-type: disc !important;margin-left: 20px !important;}#productDescription ul ul li {list-style-type: disc !important;margin-left: 20px !important;}#productDescription > ul ul li {list-style-type: disc !important;}#productDescription ul li ul li {margin: 0 0 0 20px;}#productDescription .aplus p {margin: 0 0 1em 0;}#productDescription small {font-size: smaller;}#productDescription.prodDescWidth {max-width: 1000px}
Conclusion
By our suggestions above, we hope that you can found Ge Occupancy Sensor for you.Please don't forget to share your experience by comment in this post. Thank you!