Finding your suitable readers for heat pump fan motor 1/4 hp is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for heat pump fan motor 1/4 hp including detail information and customer reviews. Let’s find out which is your favorite one.
739 reviews analysed
1. MARS – Motors & Armatures 10728 1/4hp 1075rpm, 1 Speed 1.8 Amp Outdoor Condenser Fan Motor
Description
1 speed motor; 1.8 amp; use to replace motor for other popular models; 16.7 pounds; 15 inches in length.
2. Carrier Condenser Motor 5KCP39EGS070S 1/4 hp, 1100 RPM, 208-230V Genteq # 3905
Description
Suggested replacement reference for: 5KCP39EGY823S, 5KCP39EGS070S, Carrier HC39GE237A, HC39GE237, Dayton 6DLL0, GE 3905. **Please Note Product May Be Labeled GE or Fasco**
3. Fasco D7909 5.6-Inch Condenser Fan Motor, 1/4 HP, 208-230 Volts, 1075 RPM, 1 Speed, 1.8 Amps, Totally Enclosed, Reversible Rotation, Ball Bearing
Description
Product description
Motor Type: Permanent Split Capacitor RPM: 1075 HP: 1/4 Volts: 208-230 Amps: 1.8 Hz: 60 Phase: Single Phase Thermal Protection: Automatic Speeds: 1 Rotation: Reversible Bearings: Ball Enclosure Type: Totally Enclosed (TE) Frame Size: 5.6″ Frame Motor Diameter (In.): 5.6 Motor Length (In.): 4 Shaft (In.): 1/2 X 6 1/2 Bolt Circle (In.): 5-6/32 (5.2)
From the Manufacturer
PSC motor, 4 drilled and tapped holes in the shell, all angle mount bearings, 60 Degree ambient temperature rating, 1/2-Inch x 6-1/2-Inch shaft, 5mfd/370V Capacitor Needed – Not Included
4. F48AA68A50 – York OEM Condenser Fan Motor – 1/4 HP 230 Volt
Description
This is a Brand New OEM Condenser Fan Replacement Motor
5. A1728, 1/4 HP Condenser Fan Motor 1075RPM, 1.8AMP
Feature
- 1/4HP, Outdoor Condenser Fan Motor, 208-230 volt, 1075 RPM, 1.8AMP
- Capacitor (not included) 5 MFD/370V
- Replaces: AOS Century FSE1026S, Emerson: 1860, MARS 10728, Fasco D909, GE/Genteq 3728, Packard 43728, Partner’s Choice: 01-0161, Rheem Protech W51-14CJA1-01, Carrier RCD: P257-8728, York Source 1: S1-FHM3728, Wagner: WG840728
- Repair video: https://youtu.be/VxEcFCR6TkI In addition, the motor comes with drain plugs on both end-shields. If you install the motor shaft (facing) down, you need to remove the drain plug on the shaft side end-shield. If you install your motor shaft up, you need to remove the plug on the non-shaft end. This will allow moisture and condensation to drain out of the motor
- All Angle, ball bearing
- Rheem mounting holes w/screws installed
- Water slinger on shaft
- Thru-bolt or band mounting
- Double full flatted shaft
- Class B insulation
- Single phase, 60 hertz
- Thermal overload protected
- Fan duty, continuous, air over
- Totally enclosed non-ventilated
- 36 inch leads
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
Description
Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find it on millions of HVAC equipment including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. The Amazon venue is intended for contractors, repair technicians, and do-it-yourselfers, who otherwise many not have been adequately served with Broad-Ocean motors.
6. 024-27596-000 – York OEM Condenser Fan Motor – 1/4 HP 230 Volt
Description
This is a Brand New OEM Condenser Fan Replacement Motor
7. MOT11051 – OEM Trane American Standard Condenser FAN MOTOR 1/4 HP 200-230v by Trane
Description
Trane MOT11051. MOTOR; 1/4 HP, 200/230/60/1, PSC, 48 FRAME, 1
8. 024-27596-000 – Coleman OEM Condenser Fan Motor – 1/4 HP 230 Volt
Description
This is a Brand New OEM Condenser Fan Replacement Motor
9. 5KCP39FGY563S – GE Replacement Condenser Fan Motor 1/4 HP 208-230 Volt
Description
This is a Brand New GE/Genteq Furnace Blower Motor
10. 1/4 hp 1075 RPM 48 Frame 208-230V 5 5/8" Diameter Condenser Fan Motor # EM3728
Description
EM3728,
REPLACE A.O SMITH, CENTURY, FE1026SF, FSE1026,
FSE1026SV1, FSE1026SF
- Horsepower :1/4
- Voltage :208-230
- Amps :2.00
- RPM :1075
- Frequency :60 Hz
- Length :3.86″
- Enclosure :Totally Enclosed
- Shaft Dim. :1/2” x 6.00”
- Type :Permanent Split Capacitor
- Diameter :5-5/8″
- Frame :48
- Bearings :Ball
- Rotation :Reversible
- Protector :Automatic
- Phase :1
- Ambient Temp. :60°C
- Capacitor Rating :5MFD-370V
- Feature(s) :Shaft Slinger, Extended Thru-Bolts, Reversing Plug
- Weight (lbs.) :11
Conclusion
By our suggestions above, we hope that you can found Heat Pump Fan Motor 14 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!
