526 reviews analysed
1. BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed
- ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
- ✓ Century to BN-LINK: Your product might come in the brand of BN-LINK or Century as we are currently rebranding to BN-LINK. Please be assured that the quality remains the same.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
2. Pymeter Digital Temperature Controller Heat Mat Dual Thermostat Outlet Heating Cooling for Homebrew Reptile Aquarium Greenhouse Heater
- ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
- ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
- ✓【Safe and Reliable】Support High and Low Temperature Alarm
- Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
- ✓【Enhanced Functions】Power-Off Memory
- Power-On Delay
- Temperature Calibration.
- ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
3. Zoo Med ReptiTemp RT-600 Digital Thermostat Controller
- Temperature control range: 50F to 122F. Controls Temperature by turning on heating devices in HEAT mode or by turning on cooling devices (e.g. fan) in COOL mode.
- Remote Temperature Sensor with 6 foot cable.
- Controls up to 600 watts of heating devices. Controls up to 150 watts of cooling devices.
- Built in memory stores settings in case of power failure.
- Alarm flashes and sounds when temperature reaches extreme high or low levels.
The Zoo Med Reptitemp Digital Thermostat allows you to maintain precise control of your terrarium temperature with an easy-to-program LCD interface. Just plug in your heating device (up to 600 watts) or cooling device (up to 150 watts), set the desired temperature and mode, and let the Reptitemp handle the rest! 1 year manufacturer warranty
4. Zacro Digital Heat Mat Thermostat – Reptile Heat Pad, for Seed Germination41-108°F, 1-Pack, Black
- Variety of uses: heating thermostat for seed germination, rooting, reptiles, home brewing and fermentation to provide a constant custom temperature, so that your environment is maintained within the ideal temperature range.
- Bright and easy-to-read LCD display and work indicator settings make it easy to see the operating status of the thermostat and temperature changes at any time.
- Precise temperature control:The digital thermostat provides temperature control between 41°F and 108°F (5-42°C). Accuracy is ±0.1 degrees, no need to worry about overheating and not meeting your temperature requirements.Digital display supports units in both Fahrenheit and Celsius.
- Quality Assurance:The product has passed UL test. Zacro is committed to providing customers with sincere service and high quality products. Please buy with confidence
- NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment.Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug.
5. Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling
- [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year
1 x Temperature and Time Controller
1 x Manual
6. Simple Deluxe 150W Infrared Ceramic Reptile Heat Lamp Bulb Combo for Amphibian Pet
- Multifunction: great for reptile and amphibian terrariums, incubating poultry heater, can increases blood circulation promoting health and healing.
- Perfect 24 hour heat source: heat bulb does not emit any visually detectable light, wouldn’t disturb pets sleep. 110-120V, 150W, E26 lamp base. Material: Ceramic, metal, . To avoid scald, Please wait at least 1 hour to cool down after turn off the bulb
- Multifunctional clamp light: scratch-resistant sleeves covered clamp wouldn’t leave marks on your surfaces, adjustable ball joint and 8. 5 inch aluminum reflector can focus light where you need. Volt: 120V, Watt: 150W (E26). have convenient on/off button
- Temperature range: digital thermostat provides temperature control between 40-108°f (5-42°c), temperature display Range: 32-140°f. Can choice Celsius or Fahrenheit readout. Volt: 120V 60Hz, Max Loading: 8A 1000W. Do not immerse controller or probe into water
- Package Include: 1-Pack 150W ceramic heat bulb, 1-Pack digital thermostat (easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug), 1-Pack clamp light with 8. 5 inch reflector. All products 1 year Manufacturer
Infrared Ceramic Reptile Heat Bulb: Specifications: Socket: E26Volt: AC 110-120VWatts: 150WMaterial: Ceramic, Diameter of heating surface: 85 mm Note: 1. Lamp surface temperature is too high, do not directly touch during it works. 2. Before remove it from fixture, please allow at least 1 hour for cool to avoid scald. 3. Accidents may happen due to improper operation so please use it in a right way and avoid using in damp environment. 4. Please adjust the distance between the lamp and the pets, at least 35cm. 5. Please away from combustible or explosive materials. ; Digital Thermostat Controller: Specifications: Temperature control range: 40-108°FTemperature display range: 32-140°FRated Voltage: AC 120V 60HzMax Loading: 8A 1000WEasy plug-in operation with LED illuminated indicator lights & three-prong ground plug The cord of the temperature probe and grounded three-prong plug is 6 feet ETL certification is proof that a product complies with widely-accepted safety standards Digital thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. Abnormal Warning: 1. If thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32. 0 degrees Fahrenheit. 2. If thermostat shows “E2”, it means that the actual temperature is higher than 60. 0 degrees Celsius or 108. 0 degrees Fahrenheit. 3. If thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor. Clamp Light: : 120VWatt: Accepts up to 150W bulb (E26)Reflector Diameter: 8. 5 inch Cord: 6 Feet 18/2 SPT-2 Cord UL Listed Clamp light can also be used as a table lamp in your room, garages or art studios, a work light in photography and workshops, amphibians and reptiles pets terrarium heat lamp, and even a growth light for indoor plants. Warning: The power cord on this product contains chemicals, including lead known to the State of California to cause cancer. Wash hands after use.
7. Ohuhu Digital Seedling Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, 68-108℉ Temperature Control
- ???? Safe & Reliable: This highly accurate thermostat controller will adjust the mat’s temperature in seconds, keeping your plants and pets cozy and comfy. This outlet thermostat controller will keep the temperatures between 68°—108°F (20°— 42°C) with the touch of a button.
- ???? Streamlined Button Panel: The 3-button control panel cuts out the frills. Operation is simple—just plug it in to any three-prong outlet, change the temperature with the up and down buttons, and press “set” to lock it in.
- ???? Plants, Pets, and More: Keeping your plants and animals healthy and strong is hard work! Let Ohuhu help you out. This thermostat remote can create the perfect environment for hatching, germination, rooting, fermentation, and flowering.
- ???? Easy to Read Display: No more squinting in the dark. An ultra-bright LED screen displays the temperature for easy viewing. One button toggle between Fahrenheit/Celsius displays.
- ???? Hang or Stick It Anywhere: Install the controller wherever you please with the included a hanging cable and a suction hook! Install the thermostat on a wall, on a terrarium, on a shelf, on a cabinet, and so much more.
Don’t bother fiddling around with your thermostat— let the Ohuhu Thermostat Temperature Controller do the hard work for you. This small and sleek remote keeps your garden, fish tank, and hatchery at a comfortable temperature (between 68°— 108°F) with just the touch of a button. The thermostat controller will turn off when your desired heat is reached and will turn on again if the temperature drops. Simply adjust and set your temperature for steady heat all day long. Operation is easy— just plug it in, set it down, or hang it up. Make your life easier with Ohuhu!
8. Poniie TC-10A Digital Heat Mat Reptile Thermostat ℃/℉ Dual Display Heating & Cooling Controller for Seed Germination, Reptiles and Brewing w/Calibration Function
- CONVENIENT DESIGN: Pre-wired plug and play design, easy to program, high accuracy waterproof sensor, support °C/°F display
- DUAL RELAY OUTPUT: Be able to connect with heating and cooling loads at the same time with control range (-4~176℉)
- DUAL DISPLAY WINDOW: Be able to display measured temperature and set centering temperature at the same time
- CALIBRATION & PROTECTION: Be able to calibrate temperature and set delay to protect your refrigerator from cycling too fast
- BUY WITH CONFIDENCE: 1-YEAR Warranty
- MAX. 1200W (120V)
- Over temperature & faulty sensor alarm, with power off memory
9. DIGITEN Wireless Temperature Controller, Thermostat Outlet Remote Control Thermometer with 2m/6ft NTC Temp Sensor Probe 3 Prong Plug Heating Cooling Mode for Fan Heater Greenhouse
- 【Wireless Remotely Control】: Remotely set parameters and view temperature, no need to operate on the receiver, remote control distance can reach 50-100m (empty ground). It can save all settings even if the power failure.
- 【Easy to use and program】: Only 2-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and play with your home device. Widely used for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, greenhouse, etc.
- 【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Free to switch between ℃/℉. Maintains stable room temperature and provides comfort and energy saving.
- 【ON/OFF manual button on the receiver】: Manually turn on/off the receiver remotely. LCD with backlight display reading accurately. Portable design, handheld/wall mounted.
- 【High Accuracy】: Receiver with 2m/6ft NTC highly accurate temperature probe, ambient temperature is detected automatically by thermostat outlet, when current temperature reach to target temperature, the thermostat socket stop to heat or cool. High and low temperature alarms are available, the maximum load can reach 14A, 1500W
10. iPower 40-108 Degrees Fahrenheit Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, Black
- PROFESSIONAL RELIABILITY: Digital temperature controller for heat mat in colder or warmer environments. 1 Year manufacturer warranty. Package include: 1 pack iPower digital heat mat thermostat controller
- VARIETY OF USES: Heat mat thermostat provides constant customized temp for Seed Germination, Rooting, Reptiles, Homebrewing and Fermentation, keeping your various environments in their ideal temperature range
- TEMPERATURE RANGE: Digital thermostat provides temperature control between 40°F – 108°F (5-42°C). Temperature Display Range: 32 -140°F. Choice of Celsius or Fahrenheit readout
- TECHNICAL SPECIFICATIONS: 120 Volts / 8.3 Max Amps /60 HZ / 1000 Watts. Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug
- NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment
“The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1.Controls temperature in colder or warmer environments 2.Digital temperature controller for heat mat 3.Provides constant optimum temperature for specific crops 4.Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F 5.Celsius or Fahrenheit read-out 6.Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts 7.Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug 8.CETL certification is proof that a product complies with widely-accepted safety standards 9.1 Year Manufacturer Warranty Seeding Heat Mat Setup Instructions： Place sensor into the rooting area about 1″”- 1-1/2″” Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning： If thermostat shows “”E1″”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit If thermostat shows “”E2″”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit If thermostat shows “”E3″”, it means that the temperature sensor is not working properly. Please re-install the sensor”
By our suggestions above, we hope that you can found Heating Thermostat Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!