Top 10 Jhou3s Star 34 Hp Jet Pump

3/4 HP, 115/230 V, 60 Hz stainless steel shallow well jet pump system on a stainless steel 7 gal pressure tank. Eliminate rust and drink cleaner water with a stainless steel pump. Recommended for residential use in homes, cottages or farms. Maximum vertical lift of 25′. Built-in ejector. High performance Norrys impeller. Totally enclosed fan cooled motor powered by a full-time run capacitor to eliminate starting wear vs regular motors. Thermal and overload protection. Large stainless steel corrosion-resistant body, easy to prime. Built for an intermittent or a continuous use. Maximum pressure of 65 PSI, comes installed with pressure switch factory set to 30/50 PSI. 1″ NPT suction and discharge. 0 – 100 PSI pressure gauge. Factory assembled for quick and easy installation. Capacity at 30 PSI: 897 US GPH/5’; 749 US GPH/10’; 638 US GPH/15’; 555 US GPH/20’; 472 US GPH/25’.

Specification:

Flow rate: 23 GPM

Dimensions: 9.1 x 17.8 x 9.1 inches
Weight: 39.6 pounds
Product warranty: 1-year warranty
Keep your rural home, farm, or cabin supplied with fresh water all year long for years to come with the help of this Red Lion RJS-75 3/4-HP Premium Shallow Well Jet Pump. This heavy-duty pump is designed with a 115/230-volt motor with capacitor as well as corrosion and rust-resistant cast iron casing to ensure years of service and reliability.
It also features 50 PSI and a 16 GPM flow rate with automatic shut-off, voltage selector for simple connection to existing power sources, a factory pre-set 30/50 pressure switch, and a glass-filled thermoplastic impeller and diffuser for high performance and efficient water flow. Ideal for shallow wells up to 25 feet in depth, the Red Lion RJS-75 3/4-HP Premium Shallow Well Jet Pump will get the job done.

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

Acquaer SJC075 is a 3/4 hp shallow well jet pump is designed for wells up to 25 ft. Deep. The pump can run at 115 or 230 Volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery.

This Flotec Thermoplastic Shallow Well Jet Pump provides good pressure pumping, perfect for shallow wells less than 25-ft. deep. Thermoplastic construction gives high corrosion resistance. Comes with prewired 30/50 pressure switch. Amps 12.2/6.1, Flow GPH 720, HP 3/4, Max. PSI 78, Max. Suction Lift ft. 25, Max. Total Head ft. 181, Discharge Port in. 1, Self-Priming Yes, after initial prime, Suction Port in. 1 1/4, Thermal Overload Protection Yes, Volts 230/115, Pump Housing Thermoplastic, Dimensions L x W x H in. 22 13/16 x 11 1/16 x 10 1/2. Perfect for shallow wells less than 25-ft. deep Thermoplastic construction gives high corrosion resistance Comes with prewired 30/50 pressure switch Heavy-duty dual-voltage motor Self-priming after pump housing is initially filled

3/4 horsepower, 115/230 Volts, noryl shallow well jet pump. Bearing to bearing stainless steel motor shaft. 1 1/4 inch suction and 1 inch discharge. Full time run capacitor to eliminate staring wear. Stainless steel mechanical seal. Designed for a maximum vertical suction lift of 25 feet. Pumps up to 850 gph. Pump capacity: 5 feet/850 gph, 10 feet/760 gph, 15 feet/670 gph, 20 feet/480 gph, 25 feet/425 gph.

Product Description

Wayne PLS100 1 hp portable stainless steel water sprinkling pump. 1 hp; max. Flow rate is 720 gallons per hour; 520 gph at 10 ft. Of discharge lift. Portable stainless steel with safe and convenient on/off switch and easy carry handle for portability. Fan cooled continuous-duty 115 volt motor draws water up to 20 ft. 1 in. Npt suction and discharge threads, 3/4 in. Garden hose adapter included. 180 ft. Of total dynamic head, maintains pressure up to 80 psi. Durable corrosion resistant construction. Lift water as high as 25 ft. And discharge pressures from 35 to 50 psi.

Amazon.com

The Wayne 1 HP 720 GPH portable lawn sprinkling pump is designed to draw water from ponds and rivers to sprinkle lawns or gardens, clear standing water, and empty or fill tanks. It’s made from durable stainless steel that holds up to wear and has threads that won’t strip. The pump generates suction lift of up to 20 feet, with a maximum discharge head of 180 feet and 720 gallon per hour maximum flow rating. The automatic thermal protection prevents overheating if small extension cords are used to power the pump, and a garden hose adapter makes start-up simple. You should use this pump with the highest amp-rated cord possible for optimum performance. Wayne backs its pump with a one-year limited warranty.