609 reviews analysed
1. Gizmo Dorks PEI Sheet 5" x 5.5" (127mm x 140mm) 1mm Thick Build Surface with 3M 468MP Adhesive for Monoprice MP Select Mini 3D Printers, Made in The USA
2. Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235MM
Feature
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
Description
Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints.
3. CHPOWER Creality CR-10 Bed Surface, CR-10S Ultra-Flexible Removable Magnetic Build Surface 3D Printer Heated Bed Cover, 310x310mm
Feature
- EASY REMOVAL OF PRINTS: CR-10 upgrade parts, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.
- SIZE: 300x300mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds.
- DURABILITY & EASY CLEAN: CR-10 bed surface is capable to work at 70ºC. Easy clean with alcohol.
- SIMPLE INSTALLATION: This CR-10 plate comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- MORE FLAT FOR PRECISION: Super Flatness. Prevent warping. Fast and uniform heating. More precise on printing, especially the bottom of the prints.
Description
Instructions：
The product is divided into two parts: the form of A+B
– Part A: The top is a matte surface (the same as other stickers), and the back is magnetic (the interaction with the front of Part B plays an attractive role)
– Part B: The top is magnetic (with the adsorption under the A part), the back is the 3M adhesive (posted on the printer platform, which plays a fixed role)
Description:
Easy removal Magnetic CR-10/CR-10S 3D printing platform for PLA filament material. To use this cr-10 bed surface, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing.
Feature:
1. Introducing the first ever removable, magnetically secured, cr-10 build plate for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
2. Flexible 3D Printing CR10 Build Plate: reusable, provides a durable and stable build surface whilst preventing model warping.
Kindly note:
1. This CR-10S Magnetic Build Surface is rated for PLA filaments ONLY. Any other filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will not prevent your printing from warping.
2. This cr-10 build mat 300 x 300 is not for use with high-temperature printing applications above 70°C.
4. Upgraded Creality 3D Printer Platform Tempered Glass Plate 235×235 for Ender 3 / Ender 3 Pro Ender 5 Hot Bed
Feature
- Very easy to take off the models
- No tools needed when removing models.
- Use clips to fix the glass plate on the hot bed.
- Higher temperature higher sticky. The models will stick on bed firmly when temperature is high.
- Fit for Ender 3 / Ender 3X / Ender 3 Pro / Ender 5 / CR-20 Pro 3D printer.
- Life-time professional technical supports.
Description
The same installation holes as the standard MK2 and MK3 hot bed, and it’s compatible with almost all 3D printers with MK2 and MK3 hot bed.
1.Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
2.Integrated with heated bed: Super Flatness, Fast and uniform heating
3.Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC.
4.Easy to clean:easy to clean by alcohol/water.
5.Compatibility: compatible with all the Cartesian style 3D printer with a MK3 heated bed.
Upgrade your printer!
Temperature settings for different filaments:
1. PLA:50-70ºC
2. Flexible filament: 50-70ºC
3. ABS:100-125ºC ( 110ºCis recommended )
4. PC:100-130ºC ( 120ºC is recommended )
5. Nelon:90-120ºC ( 110ºC is recommended )
6. PP:100-130ºC ( 120 ºC is recommended )
7. PETG: 50-70ºC Specification: Material:( Special Glass + microporous coatings ) Item size:( 310*310*4MM)
Specification:
Material: ( Special Glass + microporous coatings )
Item size: ( 245*245*3MM)
5. BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
Feature
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Description
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 24V 50W Ceramic Cartridge Heater
6. CHPOWER Ender 3 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5
Feature
- Compatibility: This upgraded gray MK8 style metal extruder is an original upgraded replacement part for CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, Ender 3, Ender 3 Pro, Ender 5.
- Compatible with PLA/ ABS/ Wood/ TPU/ PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
- Work Better : It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Easy to install: All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
- Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.
Description
Ender 3 Pro / Ender 3/ CR-10 Extruder Upgraded Aluminum Metal MK8 Bowden Extruder, 40 Teeth Drive Gear 1.75mm Filament for Ender 3 Pro, Ender 5, CR-10 Series.
– Features:
* upport Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S, S4, S5
* Works better than original plastic stock extruder, make loading filament much easier.
* Compatible with PLA/ ABS/ Wood/ TPU/ PTEG
* 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
* Easy to Install.
– Specifications:
* Material: Aluminum Alloy
* Color: Gray
* Drive Gear: 40 Teeth
– Package List:
1x Gray MK8 extruder
1x Manual
7. CHPOWER Stainless Steel and Silicone Collapsible Funnel Resin Filter Cup for SLA DLP LCD 3D Printer Formlabs Elego Mars Photon Sparkmaker Pack of 1 for Each
Feature
- Silicone funnel is used to pour resin back into a bottle, fit all kind of bottle ( the max width of the bottle neck is 15mm).
- Filter is made of stainless steel, easy to use and clean, ffectively filter impurities while pouring resin back into the bottle.
- Funnel adopts high quality silicone as raw material, soft and pliable, healthy and eco-friendly
- Collapsible design, compact and convenient.
- 100% brand new and high quality
- useful accessory for 3D printing.
- For better using effect, use the stainless steel filter matching with foldable funnel.
Description
Specifications:
Funnel:
Material: silicone
Color: random
Width Top: 75mm
Width Bottom: 15mm
Height: 100mm
Type: Foldable
Filter:
Material: stainless steel
Top Diameter: 60mm
Bottom Diameter: >27mm and <60mm
Height: 34mm
Package Size: 15 * 10 * 4cm / 5.9 * 3.94 * 1.57in
Package Weight: 40g / 1.41oz
Package List:
1 * filter
1 * silicone funnel (random color)
Note:
After use rinse the filter in IPA to clean it.
8. Creality Original 3pcs Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for 3D Printer Creality Ender 3 Ender 3X
Feature
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament sticked during printing, while also help removal of the printed model afterwards.
- Compatible with ABS, PLA, HIPS and other filament.
- Single sheet design installs more quickly and with fewer bubbles than tape or films.
- Durable construction allows for multiple uses with either the same or different filament materials.
Description
Creality Original 3d Printer Replacement Build Surface Plate for Ender 3
Size:235mm x 235mm
Color:Black
Background is made of 3M adhesive , easily stick on the heat bed platform
HOW TO USE:
There are 2 methods to attaching the build surface on heatbed:
1. clamp the build surface to the print bed using binder clips（at least 3 clips)
2. Torn off 3M tape on back and stick it on heatbed.
9. CHPOWER Big Plastic Pulley Wheel with Bearing Idler Pulley Gear Perlin Wheel for Creality CR-10, CR-10S, S4, S5, Ender, Ender 3 Pro, CR-10S Pro 3D Printers, Pack of 10, Black
Description
Specifications:
– Material: POM+steel
– Color: Black
– Application: Used for 3D Printers
Package list:
10x Plastic wheels with bearing
Note:
1.Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2. The pulley has of many kinds size,please confirm correctly before you bought. Need more help please feel free to contact us, we will try our best to help you.
10. CHPOWER Adjustable Y-axis Synchronous Belt Stretch Straighten Tensioner for Ender 3 pro 3D Printer
Feature
- Simple to use, professional and practical.
- Made of aluminum alloy material, durable and long time to use.
- Mini size, portable and perfect for your 3D printer.
- Surface anodizing treatment, effective protection. Easy to operate, combination installation and use.
- A perfect replacement for your old one or broken one.
Description
Features:
– Simple to use, professional and practical.
– Made of aluminum alloy material, durable and long time to use.
– Mini size, portable and perfect for your 3D printer.
Specifications:
Material: Aluminum alloy
Color: Black
Model: Y axis straighten tensioner
Package List:
1x Straighten Tensioner
Note:
1. Due to the light difference, the item’s color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
Conclusion
By our suggestions above, we hope that you can found Lulzbot Taz Heating Pad for you.Please don’t forget to share your experience by comment in this post. Thank you!
