913 reviews analysed
1. Kommen Tools Vacuum Pump Sealing Cap Removal and Installer for BMW N51, N52 Engine Type
Special designed to install or replace oil pump and vacuum pump on BMW engine. OEM No.: BMW 114 360, 110 290 Applications: BMW N51, N52 engine
2. Performance Tool W87030 One Man Automotive Hand Vacuum Pump Test & Brake Bleeder Kit
- One person brake bleeding and automotive test kit.
- Vacuum tool can test and diagnose a wide varity of parts and common systems on any vehicle.
- Complete kit includes accessories for both brake bleeding and automotive diagnosis.
- Test Ignition timing, chokes, mechanical fuel pumps, and other vacuum actuated accessories.
- Pumps approximately 1 cubic inch per stroke, and develops and holds up to 25″ of vacuum (Mercury Hg)
- Vacuum gauge scales is in inches of Mercury (Hg)
- New design which can be identified with the gray handle. New design includes added features and improved structural design
Performance Tool W87030 Hand Vacuum Pump Brake Bleeder. One person brake bleeding and automotive test kit. Vacuum tool can test and diagnose a wide variety of parts and common systems on any vehicle. Complete kit includes accessories for both brake bleeding and automotive diagnosis. Test Ignition timing, chokes, mechanical fuel pumps, and other vacuum actuated accessories. Pumps approximately 1 cubic inch per stroke, and develops and holds up to 25″ of vacuum (Mercury Hg). Vacuum gauge scales is in inches of Mercury (Hg).
3. 8MILELAKE 21pcs Handheld Vacuum Pump Set Tester Compatible for Automotive with Adapters Brake Bleeder Test Kit
- Heavy Duty 21pc Hand Held Vacuum Pump and Brake Breading Kit
- Checks vacuum and pressure operated automotive components
- Pressure to 45 PSI (3.1 bar) Vacuum to 20 inHG
- Slide black valve direction slider chamber forward toward connection barb for vacuum, slide back for pressure
- Durable construction vacuum pump/brake bleeder in Form Fitted storage case
4. Kohler 32 789 01-S Engine Maintenance Kit
For use with Kohler Courage Twin Cylinder 20-27 HP engine models SV710-740
Includes: air filter, pre-cleaner, oil filter, fuel filter, 10W-30 oil (2 quarts) and spark plug
Air filter part number 32 083 03
Pre-cleaner part number 32 083 05
Oil filter part number 52 050 02
Fuel filter part number 25 050 22
Spark plug part number 12 132 02
5. Thexton Mfg Co. 492 Spark Plug Installer/Remover Kit
Can’t reach or safely start spark plugs in deep recessed holes? This kit contains the tools to fit most spark plugs especially coil-on-plug. Tools are made of flexible, heat-resistant plastic to reach into recessed areas or over, under and around hot manifolds. Shaft is stepped to grip insulator. Non-slip, black grip surface for sure handling.
6. Dorman 917-125 Crankcase Ventilation Tube
7. GZYF Automotive Water Hose Fitting Replacement for BMW 335i, 335xi, 135i , 2006-2010 325i, 330i
- FUNCTION: Designed to maximize the resistance to breakage, coolant flow path through the center of the fitting is optimized to maximize coolant flow
- LONG LASTING: Made from high strength aerospace aluminum, Grade 6061 T6511
- EASY INSTALLATION: Simply remove the end of the hose from the plastic fitting and then the fitting from the head (hose does not need to be removed from the thermostat housing to do this)
- Then install the replacement aluminum fitting to the head and slide the hose and hose clamp over the fitting
- FITMENT: The water hose fitting fits 3.0L twin-turbo N54 (3.0-litre twin turbo) motors 335i, 335xi, 135i and the N53 (3.0-litre non-turbo) 2006 – 2010 325i, 330i, 525i, 525xi, 528i, 528xi, 530i, 530xi and the N20 (2.0-litre turbo) Z4 2013-, and the N52 X3
- also fits the next generation N55 motors in all chassis
- PACKAGE INCLUDED:1pc Water Hose Fitting (Hose not included)
3.0L twin-turbo N54 (3.0-litre twin turbo) motors 335i, 335xi, 135i
N53 (3.0-litre non-turbo) 2006 – 2010 325i, 330i, 525i, 525xi, 528i, 528xi, 530i, 530xi
N20 (2.0-litre turbo) Z4 2013-,
also fits the next generation N55 motors in all chassis.
Features: 1.This product is a direct replacement for the plastic fitting on BMW PN 11537541992 and 11537544638.
2.This aluminum coolant fitting is designed and manufactured to precise tolerances to fit the original application but with notable improvements in function.
3.This product is made from high strength aerospace aluminum, Grade 6061 T6511.
4.Also, this product was designed to maximize the resistance to breakage
5.In addition to this, the coolant flow path through the center of the fitting is optimized to maximize coolant flow.
6.There are no sharp corners on this fitting so that the coolant will not be disrupted as it passes through.
7. This hose runs from the coolant thermostat housing to the front of the head
9.This fitting is a direct replacement for the stock plastic fitting with no modification to any part of the system necessary; Simply remove the end of the hose from the plastic fitting and then the fitting from the head (hose does not need to be removed from the thermostat housing to do this);Then install the replacement aluminum fitting to the head and slide the hose and hose clamp over the fitting.
Replacement part number :11537541992 11537544638
Material:Aluminum 6061 T6511 (not cast, not forged)
1.The shipment includes the aluminum fitting, new o-ring already installed on the fitting and a stainless steel hose clamp. This listing does NOT include the hose.
Package Included:1pc Water Hose Fitting
8. Robinair (15500) VacuMaster Economy Vacuum Pump – 2-Stage, 5 CFM
- Robinair’s VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service
- featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet
- 5 CFM free air displacement
- factory rated to 35 microns
- 1/3 HP, 115V/60 Hz thermally protected motor
- Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life
- 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining
9. ZENY 3,5CFM Single-Stage 5 Pa Rotary Vane Economy Vacuum Pump 3 CFM 1/4HP Air Conditioner Refrigerant HVAC Air Tool R410a 1/4" Flare Inlet Port, Blue
- Inlet Port: 1/4″ Flare, Warm note: 1)Pressure Scale:0~400psi, 0~140psi 2)Length of hose:1.2m Red:1/4”-1/4” Yellow:1/4”-1/4” Blue:1/4”-1/4” Please make sure your manifold gauge is in accordance with this size. Any question in using, please contact seller first. *** A self-paying vacuum pump Adapter needed if inflet not suitable.
- High Efficiency and Low Noise, Heavy-duty Aluminum Alloy Casing, Oil Drain Plug Positioned at Bottom of Oil Reservoir,Internal High Volume Cooling Fan for Extended U
- Exhaust Port with Exhaust Cap, Direct Drive Motor Allowing Easy Starting Which is Maintenance Free
- Oil Sight Glass For Monitoring Oil Levels, ON/OFF Switch
- Non Slip Cushion Handle, Comes With a Bottle of Vacuum Oil
10. Mutuactor Fishing Magnets 400lbs Pull Force,Strong Retrieval Magnet N52 Neodymium Magnets with 20m(66Feet) Durable Rope,Powerful Magnets for Fishing and Magnetic Recovery Salvage
- Much Strong Magnets: 400LB vertical magnetic pull force on base of 1.18” thickness steel plate under ideal condition due to the real high grade and bigger size naked Neodymium Magnet N52
- High Strength Fishing Magnet Rope Included: Diameter 5.0mm（0.196inch）* Length 20m (66 feet) Nylon high strength nylone Rope included , you just only take it and go fishing directly without other anything.
- Multi-Use for Retrieving Magnet: Design for heavy duty and underwater application, ideal for fishing, lifting or recovering lost ferrous objects under water, for example water pump, ferrous tools, breakage of heavy metal objects, ancient objects. Also hanging, fixing application and hobby worldwide
- Good Corrosion-resistance Magnet for Fishing: Ni+Cu+Ni Tripler Layer good corrosion-resistance coating, used both in fresh water and in marine. Steel shell can avoid the naked magnet from scratching and chipping. Loss of magnetic properties no more than 2% within 10 years
- No risk of Super Strong Magnets: All production processes carry out strictly per IS09001:2008 quality system. All fishing magnets undergo extensive testing for tensile strength,We offer 365 days after sales service for all Mutuactor magnets .
By our suggestions above, we hope that you can found N52 Vacuum Pump Tool for you.Please don’t forget to share your experience by comment in this post. Thank you!