Top 9 Radio Dash Adapter

DESCRIPTION

American International has assembled everything you need to install an aftermarket radio into your 2009-2014 Ford F-150. Compatible with single ISO with pocket or double DIN sized radios! Included is the 2009-2014 Ford F-150 dash kit (fits all trim levels), antenna adapter, and wiring harness all for one low price!

FEATURES

✔ Double DIN dash kit
Designed specifically for Ford F-150 pickups from 2009-2014, fits aftermarket single or double DIN radios

✔ Antenna adapter
Connects aftermarket radio to OEM antenna

✔ Wiring harness
Connects radio to factory harness

Combo Kit for Aftermarket Radio Installation in Factory Radio Location -Single Din Radio Kit, Radio Wire Harness and Antenna Adapter -Product Details: -For select vehicles only. -Use to add an aftermarket radio to the factory vehicle wiring. -Standard wire coloring usually will connect color for color to aftermarket radio’s wire harness. -Black color radio kit -Designed specifically for the installation of Single-DIN radios -High-grade ABS plastic -Important Compatibility Notes: -This harness only works with regular factory audio systems- if the factory audio system is the external amplified type like Infinity, Bose, Boston Acoustics, etc then this harness is not compatible. -Will not retain some features that go through the radio like rear dvd, steering audio controls, etc.- other adapters are needed for retention. -What’s Included? 1. Radio kit 2. Wire harness 3. Antenna adapter- Compatible Vehicles: 1996 – 2005 Chevrolet Astro, 2002 – 2002 Chevrolet Avalanche, 1996 – 2000 Chevrolet Express, 1995 – 2000 Chevrolet Pick up (C/K), 1999 – 2002 Chevrolet Silverado, 1995 – 2002 Chevrolet Suburban, 1995 – 2002 Chevrolet Tahoe, 1995 – 2000 GMC Pick Up (C/K), 1996 – 2005 GMC Safari, 1999 – 2002 GMC Sierra, 1995 – 2002 GMC Yukon

-Combo Kit for Aftermarket Radio Installation in Factory Radio Location -Radio Kit, Radio Wire Harness, Antenna Adapter, and Radio Removal Tools -Use to add an aftermarket radio to the factory vehicle wiring. -Standard wire coloring usually will connect color for color to aftermarket radio’s wire harness. -Black color radio kit -Designed specifically for the installation of Single-DIN radios -High-grade ABS plastic – contoured textured and painted to compliment factory dash -Special antenna adapter to turn on the factory amplified antenna for strong radio reception -Will not retain some features that go through the radio like steering audio controls, etc.- other adapters are needed for retention. Compatible vehicles: 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 VW Volkswagen Beetle

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( $175 ), an aftermarket radio install dash kit ( $12 ), wiring harness and a antenna adapter ($6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). Installation Directions- Tools needed for install – Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as $3.99 and a Dremel (rotary tool) knock off for $10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and the radio will be lose and ready to come out.. Keep the screw for installation of new double din radio.. Step 3: Next unplug all the wire harness and antenna cable leading into the factory radio. You will now have the empty hole ready for new double din radio and your newly purchased dash kit (DO NOT DISCARD THE FACTORY BEZEL AS YOU WILL NEED THE AC VENTS TO PUT ON THE NEW BEZEL) Step 4: The removal of the AC vents from the factory bezel.

Radio Dash kit, wire harness, and antenna adapter for installing an aftermarket radio- Dash kit works with a Double din Radio- Dash kit has a black finish. Wire harness and antenna adapter plugs directly into the car- Wire harness only works with standard non-premium amp factory systems- Not compatible with amp systems like Bose, Infinity, etc.- Red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire). Will not retain some features like warning chimes, steering audio controls, Onstar, etc- extra adapters required. Compatible with: Buick: 2008 2009 2010 2011 2012 Enclave, 2006-2011 Lucerne; Chevrolet: 2007-2011 Avalanche, 2007-2009 Equinox, 2008-2012 Express, 2006-2013 Impala, 2006-2007 Monte Carlo, 2008-2011 Silverado, 2007-2011 Suburban, 2007-2011 Tahoe, 2009-2012 Traverse; GMC: 2007-2012 Acadia, 2008-2012 Savana, 2008-2011 Sierra, 2007-2011 Yukon, 2007-2009 Pontiac Torrent; Saturn: 2007-2009 Outlook, 2008-2009 Vue; 2007-2009 Suzuki XL-7

Radio Dash kit, wire harness, and antenna adapter for installing an aftermarket radio. Dash kit works with a Single or Double din Radio- Dash kit has a black finish. Wire harness and antenna adapter plugs directly into the car- Wire harness only works with standard non-premium amp factory systems- Not compatible with amp systems like Bose, Infinity, etc.- Red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire). Will not retain some features like warning chimes, steering audio controls, OnStar, etc- extra adapters required. Compatible with: 2007 – 2010 Chevrolet Cobalt, 2006 – 2011 Chevrolet HHR, 2008 – 2012 Chevrolet Malibu (not compatible with 2008 Malibu Classic model), 2007 – 2010 Pontiac G5, 2006 – 2009 Pontiac Solstice, 2007 – 2009 Saturn Aura, 2007 2008 2009 Saturn Sky

Double Din Radio Dash kit , wire harness, radio replacement pocket and antenna adapter for replacing the radio in your Chevy and GMC truck.

Chevrolet

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( 175 ), an aftermarket radio install dash kit ( 12 ), wiring harness and a antenna adapter (6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). Installation Directions- Tools needed for install – Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as 3.99 and a Dremel (rotary tool) knock off for 10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and the radio will be lose and ready to come out.. Keep the screw for installation of new double din radio.. Step 3: Next unplug all the wire harness and antenna cable leading into the factory radio. You will now have the empty hole ready for new double din radio and your newly purchased dash kit (DO NOT DISCARD THE FACTORY BEZEL AS YOU WILL NEED THE AC VENTS TO PUT ON THE NEW BEZEL) Step 4: The removal of the AC vents from the factory bezel.