Finding your suitable readers for small 6v cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for small 6v cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
965 reviews analysed
1. 2Packs 30x30x10mm 30mm 5V Brushless DC Cooling Exhaust Fan
Description
Package include: 2 Piece fan and mounting screws & nuts
Size:30x30x10mm
Rated Voltage:5V 0.15A
Bearing type: Sleeve Bearing
Speed: 9000RPM
Air flow: 3.68CFM
Noise:24dBA
Connecter: PH2.0-2Pin
Cable Length: 15cm Or 5.9 inches
Life: 35000 hours
Weight:8g/pcs or 0.28oz
2. Wathai Brushless Cooling Blower Fan 120mm x 32mm 12V DC Centrifugal Fan High Airflow
Feature
- Package include: 1 Piece fan and mounting screws & nuts
- Rated Voltage:12V 1.0A
- Speed: 3000RPM
- Air flow: 38.5CFM
- Noise:45dBA
- Connecter: XH2.54-2Pin
- Cable Length: 25cm Or 10 inches
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 120mm(L) x 120mm(W) x 32mm(H) / 4.72×4.72×1.26 in. per fan
Description
Package include: 1 Piece fan and mounting screws & nuts
Size:120x120x32mm
Rated Voltage: 12V
Rated Current: 1.0A
Connecter: XH2.54-2Pin
Power: 12.3W
Speed: 3000RPM
Air flow:38.5CFM
Noise:45dBA
Bearing type: Sleeve Bearing
Cable Length: 25cm Or 10 inches
Life: 35000 hours
Weight: 170g/pcs or 6 oz
3. Maradyne MP166K-6 Pacesetter Series 16" 6 Volt Universal Fan (160W Reversible Straight Blade)
Description
Maradyne Universal Pacesetter Medium Profile 6 Volt Fans (MP126K-6) Diameter: 16″ Maradyne Pacesetter 6V Series electric fans are an economical and smart choice for high performance and daily driver applications. These fans feature all-glass filled nylon construction with a quiet, reversible S-blade design and molded-in mouthing feet. They can be used as pushers or pullers.
4. GDSTIME 75mm x 30mm 7530 DC 12 Volt Brushless Turbo Blower Cooling Fan
Feature
- Package include: 1 piece fan include mounting screws & nuts.
- Dimensions: 75mm(L) x 73mm(W) x 30mm(H) / 2.95” x2.87”x1.18”(L*W*H)
- Rated Voltage: DC 12V
- Rated Current: 0.26 Amp
- Speed:3200RPM
- Air flow:13.5 CFM
- Noise: 37 dBA
- The wide of inlet is 48mm / 1.9in； The Length of outlet is 36.5mm / 1.44in ±0.3
- The Wide of outlet is 24.7mm / 0.97in ±0.3
- Connector:XH2.54-2Pin
- Lead wire:UL Type (+): Red
- (-): Black. This is a two wire dc blower fan.
5. Motor Cooling Fan Heatsink Universal Heat Sink 5V-7V with JST Plug 30mm For 1:10 RC Car Boat HSP HPI Wltoys Himoto Tamiya
Feature
- ✔ Great Replacement for 1/10 540 550 3650 Size Motor Heatsink,for An Electric Motor.
- ✔ 30MM Size will Fit Brushless or Brushed Motor,Make Sure the Size Are Same.
- ✔ Hard Plastic.Do Not Break As Easy.
- ✔ This Cooling Fan Can Power Up from The Receiver, Very Easy To Use.
- ✔ Produced By HobbyCrawler ,Well made and durable,100% New.
Description
Brand : HobbyCrawler
Part No.: ACN10019
Item: 30mm Cooling Fan
Material: Premium Quality Plastic
Color: Black
Size: 30x30x10mm / 1.18 x 1.18 x 0.39 inch(L x W x H)
Weight: 20 g
Compatible with: Perfect fit for 1/10 Buggy Truck Crawler Off /On Road Car HPI HSP Traxxas Losi Axial Tamiya Redcat
Package Include: 2pcs x 30mm Cooling Fan
6. Security-01 40mm x 40mm x 10mm 4010 12V 0.15A DC Brushless Ball Bearing Cooling Fan 2pin AB4010M12 UL TUV
Description
Description : Model: AB4010M12 NAME:DC12V BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC10.8-13.2
Consuming Current : 0.11A(0.15 Max.)
Consuming Power: 1.32W(1.8 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6200 PRM
Iife Expectance: 70,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 25db***
DC Line Length : 100mm
Max. Air Flow: 6.86CFM
Rotation Direction: Clounter-clockwise
Size:40x40x10mm
Size:18g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
7. Antrader Raspberry Pi Cooling Fan 30x30x7mm 5V Brushless DC Cooling Fan for Raspberry Pi 3 B+, Pi 3 B, Pi 2, Pi B+, RetroFlag NESPI Case 3-Pack
Feature
- High quality mini brushless 3007 DC 5V fan, sleeve-bearing design cooling cooler.
- Plastic construction 7 blade fan. Fits RetroFlag NESPI Case Perfectly.
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.15AOne-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC)
- 30 x 30 x 7mm Fans. Low noise (15.92dBA)
- Comes with screw sets.
- Suitable for Raspberry Pi B, B+, A+, 2, 3 model B and B+. Completely solve the overheating problem of you Pi.
Description
The Best Product to Save Your Time and Money!
Specifications:
Bearing Type: Sleeve
Fan Size: 30x30x7mm/1.2″ x 1.2″ x 0.28″ (L*W*H)
Wire Length: 2.6 inches (66mm)
Connector: 2 pin
Color: Black
Operating Voltage: DC 3.3V – 5V
Start up Voltage: DC 3V
Current: 0.1A
Speed: 6000RPM±10%
Airflow: 1.79CFM
Noise Level: 18dba±10%
Life Time: 30,000 hours
Package Content:
3 x Raspberry Pi Cooling Fan
12 x Screw
12 x Nut
Note:
1.)The colors may have difference as the different display, please understand.
2).Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
Welcome to our store! Enjoy quality and healthy life! We dare to use the new, heart, innovation to supply the best quality products!
Any problem please feel free to contact us first so that we can supply the best service for you.
8. Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater
Feature
- This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base.
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller.
- IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
- Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM.
- The Megabase cooling unit measures 14.5″ wide, and 10″ deep. It is 1-1/2″ tall, and only requires about 1/4 inch of additional space above for airflow.
Description
OVERVIEW: This cooling system has two high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings.
It includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.
The fan unit has a specially-constructed raised air-chamber base that enlarges the area of airflow, while also sealing air and preventing vibrations. This base covers over 145 square inches. Please make sure that the top of your component has a flat area on top that is at least 14.5″ x 10″. Don’t worry if your air vents are smaller (or larger) than the air-chamber base — it will work with any size vents.
THE COOLING SYSTEM INCLUDES: 1 x dual-120mm (2 fans) Megabase fan unit, 1 x 12v trigger control module, 1 x 5 speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fan unit on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
9. GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan
Feature
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2 Amp
- Rated Speed: 2800 RPM
- Air flow: 43.6CFM
- Noise:31dBA
- Power: 2.1Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
10. 6 Volt Electric Radiator Cooling Fan-16 Inch Dia. Push/Pull-10 Blade
Description
Help your vintage engine keep cool by adding an electric cooling fan to your radiator. Electric fans are far more efficient than mechanical engine driven fans because they free up horsepower and only run when you want them to (when used with a fan controller, not included). Plus, most electric fans can be mounted ahead of the radiator (pusher) or behind the radiator (puller), with the more efficient location being on the engine side of the radiator as a puller configuration. These powerful electric fans work with 6-volt electrical systems and draw 6 to 10 amps, depending on the size. The fan is supplied as a “puller” to mount behind the radiator, but it can be changed to a “pusher” by reversing the wires and mounting in front of the radiator. Available in 12″, 14″ or 16″ diameters Fans have 10 straight blades High impact plastic construction Sealed ball bearings for long life Can push or pull Works with positive or negative ground systems Includes mounting ears (straps not included) Instructions (PDF) For best results, be sure that your generator supplies enough current to power the fan. If it does not, check out our 6 Volt Alternator 91067169. It supplies additional current at idle to run electric accessories, unlike many factory generators. To learn more about the importance of using a fan shroud along with your cooling fan, read our tech article Radiator Cooling Performance. *Relay and fan control sold separately.
Conclusion
By our suggestions above, we hope that you can found Small 6V Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
