We spent many hours on research to finding undercounter dishwasher mounting bracket replacement, reading product features, product specifications for this guide. For those of you who wish to the best undercounter dishwasher mounting bracket replacement, you should not miss this article. undercounter dishwasher mounting bracket replacement coming in a variety of types but also different price range. The following is the top 9 undercounter dishwasher mounting bracket replacement by our suggestions
972 reviews analysed
1. 2-Pack Undercounter Dishwasher Bracket Replacement – Whirlpool -Compatible – Compare to 8269145 / WP8269145 – Replacement Dishwasher Upper Mounting Bracket
Feature
- IDEAL FIT FOR MANY MODELS: Our brackets are a perfect fit for an array of Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) models, among others
- COMPARABLE TO OEM PARTS: Our dishwasher mounting brackets / undercounter dishwasher brackets are made from high-quality galvanized steel and are durable, robust, and made to last
- VALUE PACK: 2-pack anti-tip bracket provides a solid product at an excellent value. Brackets measure approximately 3 inches long x 1 inch wide (at the widest)
- EASY TO INSTALL: Quick and easy to install – installation instructions below. Comparable to OEM 8269145 / WP8269145, as well as AP3039168, PS393134, 830941, AH393134 and EA393134
- IF YOU HAVE ANY QUESTIONS ABOUT WHETHER THIS WILL FIT YOUR EQUIPMENT, PLEASE CONTACT US THROUGH AMAZON OR ASK A QUESTION. Please note: This is an aftermarket part produced by Impresa Products meeting OEM quality (based on in-house testing)
Description
1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.
2. Dishwasher Mounting Bracket Whirlpool Kit 2 Pack + 2 Mounting Screws – Undercounter Dishwasher Brackets Compatible with Whirlpool/Kenmore / Kitchenaid/Maytag / Amana
Feature
- INCLUDED: 2-pack anti-tip bracket provides a solid product at an excellent value. Brackets measure approximately 3 inches long x 1 inch wide (at the widest)
- HEAVY DUTY BRACKETS: Our undercounter dishwasher brackets are made with high quality commercial grade galvanized steel to ensure long lasting strength and performance.
- IDEAL FIT FOR MANY MODELS: Our brackets are comparable to part #8269145 / WP8269145 which fit Whirlpool, Kenmore, Kitchenaid, Maytag and Amanda dishwashers.
- EASY TO INSTALL: Quick and easy to install – installation instructions below. Comparable to OEM 8269145 / WP8269145, as well as AP3039168, PS393134, 830941, AH393134 and EA393134
- 1 YEAR WARRANTY: We stand behind our products and offer a 1 Year Warranty to all of our customers. Please contact us if you have any problems and we will resolve immediately.
Description
Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.
FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.
INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.
WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws
100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item
3. Rayhoor 2 Pack 8269145 Dishwasher Mounting Bracket Replacement with Screws for Whirlpool & KitchenAid, Replaces WP8269145 AP3039168 PS393134
Feature
- 【Perfect Replacement】Our 2 Pack 8269145 Dishwasher Mounting Bracket replace part numbers: 8269145, WP8269145, WP8269145VP, AP3039168, PS393134, 830941, AH393134 and EA393134.
- 【Widely Applicable】Fit for an array of Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) models, among others.
- 【Premium Quality】Made of good quality material, each have been well inspected and test by manufacturer, which can be applied for a long time.
- 【Easy to Install】Avoid the hassle and expense of a service call. You can install our 2 pack Bracket replacement kit with the screws we provide in just minutes.You’ll just need a screwdriver and needle nose pliers.
- 【Lifetime Warranty】If there is anything you are not satisfied, please feel free to contact us, and we will offer you a replacement or full refund. High-quality products and service is our priority.
4. 8269145 Dishwasher Mounting Bracket by PartsBroz – 2 Pack – For Whirlpool & KitchenAid – Replaces Parts WP8269145, AP3039168, AP6012289 and More
Feature
- ✅ TWO PACK: This value pack includes two dishwasher brackets measuring 3L x 1W inches. Screws not included.
- ✅ PART NUMBER 8269145: These under-counter brackets replace OEM part numbers 8269145, WP8269145, AP3039168, PS393134, 830941, AH393134 and EA393134.
- ✅ TOP NAME BRAND COMPATIBLE: The mounting brackets work with several Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag, Roper, Magic Chef, Estate, and Inglis models. Contact us to confirm compatibility.
- ✅ EASY TO INSTALL: Avoid the hassle and expense of a service call. You can install our 2 pack under-counter bracket replacement kit in just minutes. Have two screws, needle nose pliers, and a screwdriver on hand.
- ✅ HIGH QUALITY PART: Our dishwasher brackets feature a premium galvanized steel construction. They offer durability and long-lasting use.
Description
Part 8269145 comes in a pack of two. Mounting brackets secure the top of the dishwasher to the underside of a cabinet or countertop. If your dishwasher moves, shakes, or tilts forward, it may be time to replace one or both of the mounting brackets. The PartsBroz 8269145 bracket set fits and performs just like the original. Use it with a variety of top name brand dishwashers.
Installation Tips
Before beginning the repair, disconnect the dishwasher from its power source. Depending on the model, you may also need to disconnect the water supply. You’ll need a pair of needle nose pliers and a screwdriver to complete the repair. Make note that brackets typically wear down at the same rate, so be sure to check both brackets and replace both if needed.
Replacing your dishwasher’s mounting brackets is a simple way to get your dishwasher running like normal.
Have any of these problems? These brackets can help:
- Door won’t latch shut
- Door won’t close
- Noisy dishwasher
Part 8269145 is a functional equivalent for part numbers: 8269145, WP8269145, AP3039168, PS393134, 830941, AH393134, and EA393134.
Compatibility
It works with top dishwasher brands and many of their models. These include:
- Whirlpool
- KitchenAid
- Kenmore
- Maytag
- Jenn-Air
- Amana
- Estate
- Magic Chef
- Inglis
- Crosley
- Roper
Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number for your dishwasher.
5. 12 Pieces Undercounter Dishwasher Upper Mounting Bracket Replacement and 24 Installment Screws, 8269145 Dishwasher Undercounter Mounting Kit
Feature
- Package includes: 12 packs 8269145 dishwasher mounting brackets and 24 packs installation screws, replacement mounting bracket compatible with Sears, Kenmore, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef and other dishwashers
- Size and model no.: 1.6 x 1 inch, replace part numbers: compatible with 8269145/ WP8269145, AP3039168, PS393134, 830941, AH393134, EA393134, sufficient quantity for you to replace the old or broken one
- Good quality: the replacement part is made from durable steel material and well-tested, which can ensure long lasting strength and performance, fix or repair a dishwasher, suitable for replacing broken or old undercounter brackets
- Easy to install: the dishwasher bracket kit can be installed quickly and easily with a screwdriver and needle-nosed pliers, saving the hassle and time
- Please note: this is an aftermarket product (not original), the mention of any related models and brands above is only for purposes of demonstrating compatibility
Description
12-Pack undercounter dishwasher upper mounting bracket replacement and 24 installment screws, dishwasher undercounter mounting kit
Many features:
Replace part numbers: compatible with 8269145/ WP8269145, AP3039168, PS393134, 830941, AH393134, EA393134, sufficient quantity for you to replace the old or broken one.
Easy to install:
The dishwasher bracket kit can be installed quickly and easily with a screwdriver and needle-nosed pliers, saving the hassle and time.
Compatible with:
These dishwasher replacement parts compatible with Sears, Kenmore, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef and other dishwashers.
Specification:
Color: as the pictures shown
Material: durable steel
Size: 1 x 1.6 inch
Package includes:
12 x Undercounter dishwasher upper mounting bracket replacement
24 x Installment screws
Pleased note:
This is an aftermarket product (not original ), the mention of any related models and brands above is only for purposes of demonstrating compatibility.
6. 2 Packs Undercounter Dishwasher Mounting Brackets Replacement with Screws, Dishwasher Upper Mounting Clips Parts, Compatible for Whirlpool, Kitchenaid, Maytag, Kenmore, Compare to 8269145/WP8269145
Feature
- ★ COMPARABLE TO OEM PARTS: Our dishwasher mounting brackets are made from high-quality steel and are durable, robust and made to last.
- ★ IDEAL FIT FOR MANY MODELS: Our brackets are a perfect fit for an array of Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag, Roper, Magic Chef, Estate and so on. Comparable to OEM 8269145/WP8269145, as well as AP3039168, PS393134, 830941, AH393134 and EA393134.
- ★ PREMIUM QUALITY: 2 Packs of anti-tip brackets provide a solid product at an excellent value.
- ★ EASY TO INSTALL: Quick and easy to install within a few minutes, 2 mounting screws included.
- ★ Best Warranty: We provide 30 days warranty for our products and 100% satisfaction guarantee. If you have any problem, please don’t hesitate to contact us.
7. Ultra Durable 8212560 Dishwasher Side Mounting Bracket Replacement Kit by Blue Stars – Exact Fit For Whirlpool & Kenmore Dishwashers – Replaces 1201084 AP3953705 – PACK OF 2
Feature
- ✅
- MODEL NUMBER: 8212560 Dishwasher Side Mounting Bracket Kit – PACK OF 2
- ✅
- FULL KIT SET: Includes mounting brackets and screws
- ✅
- EASY TO INSTALL: It is made exactly fit for most top name brands (Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Crosley, Roper) and replaces part numbers 1201084, AP3953705
- ✅
- PREMIUM QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer
- ✅
- MONEY-BACK GUARANTEE: For any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked
8. Hotop 2 Packs 8212560 Dishwasher Side Mounting Brackets and 4 Packs Black Installation Screws, 2 Packs 8269145 Dishwasher Upper Mounting Brackets and 2 Packs Sliver Installation Screws
Feature
- You will receive: package includes 2 packs 8212560 dishwasher mounting brackets and 4 packs black installation screws, also includes 2 packs 8269145 dishwasher upper brackets and 2 packs silver installation screws
- Model No.: 8212560 dishwasher side bracket kit, 8269145 dishwasher upper bracket kit, sufficient quantity for you to replace the old or broken one
- Compatible with: these dishwasher replacement parts fit for most top name brands such as KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Roper
- Good quality: the replacement part is made from durable steel material and well-tested by the manufacturer, which can ensure long lasting strength and performance
- Please note: this is an aftermarket product (not original ),the mention of any related models and brands above is only for purposes of demonstrating compatibility
Description
2 Packs 8212560 dishwasher side brackets and 4 packs installation screws and 2 packs 8269145 dishwasher upper mounting brackets and 2 packs installation screws
8212560 Dishwasher side mounting bracket:
Material: metal
Quantity: 2 packs mounting brackets and 4 pieces install screws
Replace for part No.: 1201084, AP3953705
Color: black
8269145 Dishwasher upper mounting bracket:
Material: metal
Quantity: 2 packs upper mounting brackets and 2 packs install screws
Replace for part No.: WP8269145, WP8269145VP
Color: sliver
Practical to use:
Compatible with various most top name brands such as KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Estate, Magic Chef, Inglis, Roper.
Features:
Good quality and can be applied for a very long time.
Package includes:
2 x 8212560 Dishwasher side mounting bracket
4 x Installation screws
2 x 8269145 Dishwasher upper mounting bracket
2 x Silver installation screws
Warmly note:
Not original parts, the mention of any related models and brands above is only for purposes of demonstrating compatibility.
9. Lenink 8269145 Undercounter Dishwasher Replacement Mounting Bracket Kit Compatible with Whirlpool Kenmore Kitchenaid Dishwasher,Compare to 8269145/WP8269145
Feature
- Wide Compatibility:Lenink replacement mounting bracket compatible with Whirlpool, Kenmore,KitchenAid,Maytag,Jenn-Air,Amana,Magic Chef and other dishwashers.
- Replace Part Numbers: 8269145 / WP8269145, AP3039168, PS393134, 830941, AH393134, EA393134.
- Save Time and Money: An inexpensive way to fix or repair a dishwasher,ideal for replacing broken or old undercounter brackets.
- Easy to Install: The dishwasher bracket kit can be installed quickly and easily with a screwdriver and needle-nosed pliers,saving the hassle and expense of calling a service call.
- Packaging Includes: 4pcs undercounter dishwasher replacement brackets.
Conclusion
By our suggestions above, we hope that you can found Undercounter Dishwasher Mounting Bracket Replacement for you.Please don’t forget to share your experience by comment in this post. Thank you!
