969 reviews analysed
1. Schneider Industries Micro Vacuum Attachment 7 Piece Kit
Feature
- Universal Micro Tool Kit. Fits 1 1/4 inches friction-fit wands
- Fits all vacuums that accept standard 1 1/4 inch
- inside diameter attachments
- 35 mm (1 1/4 inch) adapter included for European sized friction-fit wands
- Does not fit any clip mounted wands like Dyson and Shark. DOES NOT FIT ANY HAND HELD VAC THAT DOES NOT HAVE A HOSE OR WAND.
- DOES NOT FIT SHARK VACUUMS
2. Green Label Micro Vacuum Accessory Kit for Shark Vacuum Cleaners
Feature
- Genuine Green Label Mini Micro Vacuum Cleaner Attachment Tool Kit for Shark
- Designed and manufactured to fit Shark clip-type mounting. Compatible with: NV583, NV650, NV650W, NV651, NV652, NV750W, NV751, NV752, HV292. Kit Contains: 1 adaptor, Pipe connector with adjustable suction fitting, Flexible tube (approx. 36” length), Curved ‘elbow’ extension pipe, Straight extension pipe, Wide oval brush, Narrow round brush, Thin (chamfered) crevice tool
- PLEASE NOTE: One of the adapters has an air flow control valve which cannot be fully closed (small holes). This is not a defect but intentional design. It is there for 2 reasons: 1) It was intentionally designed and manufactured this way to avoid too much suction on delicate electronics and jewelry items. 2) IT HELPS TO AVOID VACUUM CLEANER OVERHEATING WHICH MAY LEAD TO MALFUNCTION
- This highly effective and versatile micro cleaning kit will effortlessly clean all delicate appliances and difficult to reach places including your tv, computer, printer, car, home workshop bench plus many more.
- No questions asked return policy. Green Label is a premium and environmentally friendly manufacturer of aftermarket vacuum and steam mop filters and accessories.
3. Green Label Micro Vacuum Attachment Kit – 7 Piece. Fits Most Vacuum Cleaner hoses with 1.25-1.38 inch Diameter (Round Friction Fit Type Wands). Green Storage Bag.
Feature
- Universal Micro Tool Kit. Instructional video: https://youtu.be/tIAmlTXecHQ
- Fits 1 1/4 inches friction-fit wands. 35 mm (1.38 inch) adapter included for European sized friction-fit wands. Kit contains: 1 adaptor, Pipe connector with adjustable suction fitting, Flexible tube (approx. 36” length), Curved ‘elbow’ extension pipe, Straight extension pipe, Wide oval brush, Narrow round brush, Thin (chamfered) crevice tool
- PLEASE NOTE: One of the adapters has an air flow control valve which can not be fully closed (small holes). This is not a defect but intentional design. It is there for 2 reasons: 1) It was intentionally designed and manufactured this way to avoid too much suction on delicate electronics and jewelry items. 2) IT HELPS TO AVOID VACUUM CLEANER OVERHEATING WHICH MAY LEAD TO MALFUNCTION
- Does not fit any clip mounted wands like Dyson and Shark. DOES NOT FIT ANY HAND HELD VAC THAT DOES NOT HAVE A HOSE OR A WAND
- No questions asked return policy. Fully refundable. Green Label is a premium and environmentally friendly manufacturer of aftermarket vacuum and steam mop filters and accessories
4. Green Label Micro Vacuum Accessory Kit for Dyson Vacuum Cleaners
Feature
- Genuine Green Label Micro Vacuum Cleaner Attachment Tool Kit for Dyson
- Designed and manufactured to fit Dyson clip-type mounting. Fits: DC08, DC26 Allergy Cylinder, DC29, DC50 Animal and Multi-floor Uprights, DC47 Animal Cylinder, DC24, DC56 Hard Floor Handheld, DC25, DC11 Telescope Cylinder, DC18, DC22 Cylinder, DC17, DC14, DC21 Cylinder, DC59 / DC62 Animal Cordless, DC28 Upright, DC44, DC27, DC72, DC31, DC39, DC65/DC66, DC35, DC41 Animal, DC V6 Fluffy, DC23 Cylinder, DC40, DC V6 Absolute, DC 15, DC07, DC33. DOES NOT FIT DYSON V7, V8 and V10 HANDHELD!
- Kit Contains: 1 adaptor, Pipe connector with adjustable suction fitting, Flexible tube (approx. 36” length), Curved ‘elbow’ extension pipe, Straight extension pipe, Wide oval brush, Narrow round brush, Thin (chamfered) crevice tool. This is highly effective and versatile micro cleaning kit will effortlessly clean all delicate appliances and difficult to reach places including your tv, computer, printer, car, home workshop bench plus many more. Instructional video: https://youtu.be/UUMoUxwNrxY
- PLEASE NOTE: One of the adapters has an air flow control valve which can not be fully closed (small holes). This is not a defect but intentional design. It is there for 2 reasons: 1) It was intentionally designed and manufactured this way to avoid too much suction on delicate electronics and jewelry items. 2) IT HELPS TO AVOID VACUUM CLEANER OVERHEATING WHICH MAY LEAD TO MALFUNCTION
- No questions asked return policy. Fully refundable. Green Label is a premium and environmentally friendly manufacturer of aftermarket vacuum and steam mop filters and accessories.
5. Schneider Industries Micro Vacuum Attachment 7 Piece Kit
Feature
- Universal Micro Tool Kit. Fits 1 1/4 inches friction-fit wands
- Fits all vacuums that accept standard 1 1/4 inch
- inside diameter attachments
- 35 mm (1 1/4 inch) adapter included for European sized friction-fit wands
- Does not fit any clip mounted wands like Dyson and Shark. DOES NOT FIT ANY HAND HELD VAC THAT DOES NOT HAVE A HOSE OR WAND.
- DOES NOT FIT SHARK VACUUMS
6. Dryer Vent Cleaner Kit Vacuum Hose Attachment Brush Lint Remover Power Washer and Dryer Vent Vacuum Hose
Feature
- [Remove LINT BUILD-UP] – Sealegend dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
- [More than 28” long] – Flexible and handy vacuum hose attachments over 28inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can’t move.
- [SUCTION CONTROL] – Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- [HELPS PREVENT FIRES] – Using Sealegend Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- [Package Contains] – 1* Sealegend dryer vent cleaner kit
7. Dryer Cleaning Kit – Generic Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush. Fits vacuum hoses 1 1/4 inches or less -by Mountain Trades
Feature
- You will receive – one flexible 24 inch crevice tool cleaner and one long 28 inch brush
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. ** Important – your vacuum hose needs to have a diameter of 1.25 or less to fit)** Does not fit Dyson ** See Description below for info on Shark Vacuum Cleaners. (measure the Shark vacuum hose to make sure it is 1.25 inches or less)
- Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas like down in your lint trap.
- Both the hose attachment and the lint brush are flexible. If the weather is cold when you receive the crevice tool it may be a little stiff, as it warms to room temperature it will become flexible.
Description
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.
8. Wonlives 1.25 inch Flexible Crevice Tool Vacuum Dusty Brush Vacuum Attachments Accessories for 32mm and 35mm Standard Hose Set of 8
Feature
- Vacuum Attachments Accessories Made of high-strength and environmental protection material, durable, high-performance, and very easy to install.
- Work saving attachments for above the floor cleaning, for upholstery, drapes, Venetian blinds, fine furniture and car interiors
- All in one kit – Universal replacement attachment brush kit accessories, suitable for standard 32mm and 35 mm diameter size
- Keep your vacuum cleaner operating at peak performance! These vacuum cleaners are recommended that the replacement brush tools should be changed every 1-3 months.
- Package includes: 1×Sofa Dusting Brush, 1×Horsehair Dust Brush, 1×Mini Dusting Brush, 1×2 in 1 Crevice Tool, 1×Crevice Tool, 1x Vacuum cleaner adapter,1x Dust cleaner, 1x Flexible Crevice Tool
9. EZ SPARES 7PCS Micro Vacuum Attachment 7 Piece Kit Keyboard Crevice Cleaning Tool Brush Kit
Feature
- Universal Micro Tool Kit
- Fits 1 1/4 inches friction-fit wands
- Fits all vacuums that accept standard 1 1/4 inch
- inside diameter attachments
- 35 mm adapter included for European sized friction-fit wands, Works With Miele Vacuums, Bosch, Sebo, Hoover, Eureka, Shark, Electrolux, Bissell, Dirt Devil, Fuller Brush and more.
- Does not fit any clip mounted wands like Dyson and Shark
Description
Product Name:
EZ SPARES Micro Mini Vacuum Attachment Kit
Shipping List: 8Pcs Tool Attachments
The inner diameter: 1 1/4 inch(32mm). Please check the right inner diameter.
Applicable Model : For Most Vacuum Cleaner.
Note: Please allow 1-3mm error due to manual measurement.
About EZ-SPARES:
Since the establishment of our company in 2009,we have been committed to produce and supply the best spareparts of home appliances for the customers in the world.
Now we are offering the most comprehensive coverage of electrical appliance replacement parts for households over 40 countries.Choose EZ SPARES, we will be your good helper to provide a more convenient,comfortable and healthier lifestyle for you and your family.
10. ProTeam Xover Multi-Surface Two-Piece Wand Tool Kit,
Feature
- Vacuum tool kit comes with a 14-inch Xover multi-surface floor tool ideal for use on commercial low-pile carpet and non-delicate hard floor finishes
- glides into corners and under furniture with ease
- Long 56-inch 2-piece, 2-bend wand is made of lightweight aluminum and extends your reach for easier cleaning of high and hard-to-reach areas
- Handy 17-inch crevice tool features a narrow, angled nozzle that deep cleans around corners and gets into tight spaces
- All-purpose 5-inch upholstery tool is ideal for cleaning seating and other furniture
- 3-inch dusting brush gently removing dust and allergens from blinds, lamps and other delicate surfaces
Conclusion
By our suggestions above, we hope that you can found Vaccuflex Vacuum Attachment for you.Please don’t forget to share your experience by comment in this post. Thank you!
