608 reviews analysed
1. FoodSaver Upper and Lower Gasket Assembly Replacements (2 Foam Gaskets) – Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers (Replaces Food Saver T910-00075) by OutOfAir
Feature
- (ON SALE FOR A SHORT TIME ONLY) FIX THE SUCKING: If your FoodSaver is having a difficult time holding the vacuum while sealing, it’s likely that you just need to replace your gaskets! FoodSaver recommends replacing them annually.
- FOAM GASKETS: If you have 1 Foam and 1 Rubber Gasket, only replace your FOAM gasket. Don’t remove the rubber gasket. If you have 2 foam gaskets, always replace both foam gaskets at the same time. Please see description for details on certain models.
- WORKS WITH: V2200, V2400, V2800, V3000, and V3200 Series FoodSaver models. Also works with: GameSaver Deluxe Plus.
- V2200 Series: V2200, V2220, V2222, V2235, V2240, V2244, V2250, V2254, V2260 — V2400 Series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490 *** V2800 Series: V2820, V2830, V2835, V2840, V2860, V2865
- V3000 Series (Lower Gasket Only): V3020, V3040 *** V3200 Series(Lower Gasket Only): V3230, V3240, V3245, V3250 *** GameSaver Deluxe Plus
Description
Is your FoodSaver vacuum sealer having trouble holding suction while sealing? Our gaskets may be able to help. Our gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)
Works With These Models:
- V2200 Series
- V2000
- V2220
- V2222
- V2235
- V2240
- V2244
- V2250
- V2254
- V2260
- V2400 Series
- V2420
- V2430
- V2431
- V2432
- V2433
- V2440
- V2450
- V2460
- V2461
- V2470
- V2480
- V2490
- V2800 Series
- V2820
- V2830
- V2835
- V2840
- V2860
- V2865
- V3000 Series (Lower Gasket Only)
- V3020
- V3040
- V3200 Series (Lower Gasket Only)
- V3230
- V3240
- V3245
- V3250
- Others
- GameSaver Deluxe Plus
2. 4-Pack FoodSaver Gasket Replacement – Vacuum Sealer Upper Gasket Assembly – Fits V2200, V2400, V2800, V3000, V3200, V3400, V3800 Models (Corresponds to Food Saver T910-00075) – By Impresa Products
Feature
- PERFECT REPLACEMENT: Perfect replacement for your FoodSaver (TM) Vacuum Sealer foam gasket for models with either 1 or 2 gaskets. Installing a FoodSaver (TM) gasket replacement helps improve suction and vacuum sealing performance when Foodsaver gaskets have deteriorated
- RETURNS SUCTION BACK TO 100%: Our replacement FoodSaver (TM) gasket fits all Food Saver V2200, V2400, V2800, V3000, V3200, V3400 and V3840 series models. Corresponds to FoodSaver (TM) part T910-00075. For those models with 2 gaskets, replace both at the same time for best results
- BUILT TO PERFORM AT A GREAT VALUE: Our gaskets are made from a purpose-specific, tighly engineered foam blend to ensure the highest quality level. What’s more, we provide you with a pack of four gaskets to ensure that you always have spares on hand and never have to forgo the use of your machine because the gasket is out of commission
- FITS MOST MODELS: Replacement for V2200 series (V2220, V2222, V2240, V2244, V2250 and others), V2400 series (V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490), V2800 series (V2820, V2830, V2835, V2840, V2841, V2860, V2865), V3000 series (V3020, V3040, etc.), V3200 series (V3240, V3250, etc.), V3400 series (V3420, V3425, V3430, V3431, V3440, V3460, V3461, V3485), V3800 series (V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, V3845, V3850, V3860, V3880)
- Note: This is an aftermarket replacement product meeting or exceeding the quality of OEM gaskets (based on in-house testing), produced by Impresa Products (TM). Not for use with non-FoodSaver (TM) vacuum sealers or FoodSavers (TM) with rubber gaskets
Description
TESTED, TRUSTED AND BACKED BY OUR TOP-RATED WARRANTY AND CUSTOMER SERVICE!
PERFECT REPLACEMENT: Perfect replacement for your FoodSaver (TM) Vacuum Sealer foam gasket for models with either 1 or 2 gaskets. Installing a FoodSaver (TM) gasket replacement helps improve suction and vacuum sealing performance when Foodsaver gaskets have deteriorated
RETURNS SUCTION BACK TO 100%: Our replacement FoodSaver (TM) gasket fits all Food Saver V2200, V2400, V2800, V3000, V3200, V3400 and V3840 series models. Corresponds to FoodSaver (TM) part T910-00075. For those models with 2 gaskets, replace both at the same time for best results
BUILT TO PERFORM AT A GREAT VALUE: Our gaskets are made from a purpose-specific, tighly engineered foam blend to ensure the highest quality level. What’s more, we provide you with a pack of four gaskets to ensure that you always have spares on hand and never have to forgo the use of your machine because the gasket is out of commission
FITS MOST MODELS: Replacement for V2200 series (V2220, V2222, V2240, V2244, V2250 and others), V2400 series (V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490), V2800 series (V2820, V2830, V2835, V2840, etc.), V3000 series (V3020, V3040, etc.), V3200 series (V3240, V3250, etc.), V3400 series (V3420, V3425, V3430, V3431, V3440, etc.), V3800 series (V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, etc.)
This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM) OEM product and Impresa Products (TM) has no affiliation with or endorsement from FoodSaver (TM). Our product is not covered under any FoodSaver (TM) manufacturer’s warranty. Brand names/logos are the registered trademarks of their owners. Use of the FoodSaver (TM) brand names, models, etc. are made solely for purposes of describing and illustrating compatibility
3. FoodSaver Repair Kit: Upper/Lower Gasket, Heat Strip Replacement 4 Foam Gaskets, 2 Strips Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers Replaces Food Saver T910-00075 by OutOfAir
Feature
- FIX THE SUCKING: If your FoodSaver is having a difficult time holding the vacuum while sealing, it’s likely that you just need to replace your gaskets! FoodSaver recommends replacing them annually.
- FIX THE SEALING: If your FoodSaver is having a difficult time sealing bags, the heating element tape is probably just worn out and needs to be replaced. However this will not fix a heating element that is not working at all. See product description for more details.
- INCLUDES: 4 Foam Gaskets & 2 Pieces of Replacement Teflon Tape with Adhesive Backing. If you have 1 Foam and 1 Rubber Gasket, only replace your FOAM gasket. Don’t remove the rubber gasket. If you have 2 foam gaskets, always replace both foam gaskets at the same time. Please see description for details on certain models.
- WORKS WITH: V2200, V2400, V2800, V3000, V3200, V3400, and V3800 Series FoodSaver models. Also works with: GameSaver Deluxe Plus and Vac 800 Series — V2200 Series: V2200, V2220, V2222, V2235, V2240, V2244, V2250, V2254, V2260 — V2400 Series: V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490 *** V2800 Series: V2820, V2830, V2835, V2840, V2860, V2865
- V3000 Series (Lower Gasket Only): V3020, V3040 *** V3200 Series(Lower Gasket Only): V3230, V3240, V3245, V3250 *** GameSaver Deluxe Plus
Description
Is your FoodSaver vacuum sealer having trouble holding suction while sealing? Our gaskets may be able to help. Our gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)
Works With These Models:
- V2200 Series
- V2000
- V2220
- V2222
- V2235
- V2240
- V2244
- V2250
- V2254
- V2260
- V2400 Series
- V2420
- V2430
- V2431
- V2432
- V2433
- V2440
- V2450
- V2460
- V2461
- V2470
- V2480
- V2490
- V2800 Series
- V2820
- V2830
- V2835
- V2840
- V2860
- V2865
- V3000 Series (Lower Gasket Only)
- V3020
- V3040
- V3200 Series (Lower Gasket Only)
- V3230
- V3240
- V3245
- V3250
- Others
- GameSaver Deluxe Plus
Is your machine having trouble sealing bags closed? If so, our replacement heat strip tape could help. Over time this tape can get worn out or dirty which can cause problems when the machine tries to seal the bags. Includes instructions for replacing the heat strip/tape.
4. 3 Teflon FoodSaver Replacement Strips for Vacuum Sealers – Fits FoodSaver, Rival Seal-A-Meal, Weston, Cabella’s and Nesco Models – Made in the USA
Feature
- Three 18-in long x 0.5″ wide Teflon strips with adhesive backing. Fit virtually all FoodSaver (TM) series, incl. 2000, 3000, 4000, 5000, GameSaver (TM) & Professional, and all Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) models
- Replaces deteriorated or burnt-out Teflon tape / PTFE tape, which is a crucial barrier between the heating element and the bag in your heat sealer machine. Old tape causes poor sealing and can lead to a broken heating element and a broken sealer
- Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect
- Ideal for virtually all FoodSaver (TM) models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston (TM) Pro 2100, 2300 and more
- Peel and stick backing – easy to apply. Simple-to-follow instructions included. Over the wire for vacuum sealers, under the wire for impulse sealers. Please note: This is an aftermarket replacement product (produced by Impresa Products). Trademark IMPRESA.
Description
(3) 18″ x 0.5″ IMPRESA Teflon strips with adhesive backing. Fit virtually all FoodSaver series, including 2000, 3000, 4000, 5000, GameSaver and Professional, as well as virtually all Weston, Cabella’s, Nesco and Rival Seal-A-Meal models. Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the vacuum bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer. Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect. Peel and stick backing makes our vacuum sealer tape easy to apply. Simple-to-follow instructions included with package. Over the wire for vacuum sealers, under the wire for impulse sealers. Great for Weston Pro 2100, 2300 and more. Perfect piece of the solution when looking for replacements for FoodSaver (TM) parts, FoodSaver (TM) teflon / teflons for FoodSaver (TM) / Food Saver (TM) teflon tape / FoodSaver (TM) teflon tape, Rival Seal A Meal (TM) parts, etc. This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) OEM product and Impresa Products has no affiliation with or endorsement from FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM). Our product is not covered under any FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) manufacturer’s warranty. The FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names and logos are the registered trademarks of their owners. Any use of the FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names, models or any other related designations are made solely for purposes of describing and illustrating compatibility.
5. 3 Teflon Heat Tape Strips for Vacuum Sealers Fits FoodSaver, Weston, Seal-A-Meal, Cabelas, and Others (Made in USA) by OutOfAir
Feature
- FIX THE SEALING: If your FoodSaver is having a difficult time sealing bags, the heating element tape is probably just worn out and needs to be replaced. OutOfAir replacement Teflon tape is the highest quality available (Made in USA). Replacing your heat tape is recommended if it appears worn or you’ve run in to any problems with sealing.
- FITS ALL MACHINES: 3 Strips are each 18 inches long x 0.5 inches wide. These are purposely slightly longer and wider than necessary, simply trim length to fit your sealer model. The extra width gives you a bit more room to ensure proper coverage.
- PROTECT YOUR INVESTMENT: This tape is used to cover the heating element on your vacuum sealer machine. Worn out tape can cause problems when sealing, and could cause damage to your machine.
- WORKS IN ALL VACUUM SEALER MACHINES: OutOfAir replacement Teflon strips work in all vacuum sealers. Including FoodSaver, VacMaster, Weston, Cabelas, Rival, Seal-a-Meal, Ziploc and more.
- SAFE, CONVENIENT, RISK FREE: OutOfAir replacement strips are FDA Approved for direct food contact (-100 to 500F), and include a 60-day Money Back Guarantee.
Description
With normal usage the tape protecting the heating element in most vacuum sealers doesn’t need to replaced as often as the gaskets, but if you are having issues with your bags not staying vacuum sealed, you may want to consider replacing the tape as it can help with inconsistent sealing.
How Do I Install My Replacement Tape?
To install:
1) Simply remove the tape on your current heating element (make sure to get the residue from the old tape off).
2) Cut your new OutOfAir replacement tape to the correct size.
3) Remove the yellow backing from the tape and place over the heating element (under the element if using for an impulse sealer). Smooth out the tape with your finger as you go, to ensure a good bond.
And that’s it!
Will OutOfAir replacement tape work with my machine?
Yes it will. Works in all Vacuum and Impulse sealers that have a heating element for sealing bags.
For Vacuum Sealers you should place the tape directly over the heating element (after removing the current tape).
For Impulse Sealers you should place the tape directly under the heating element (after removing the current tape).
6. 4 Teflon Food Saver Replacement Strips for Vacuum Sealers, Heat Sealing Strip by X-HOME
Feature
- Work perfectly for your vacuum sealer:If your Food Saver have difficult time in sealing bags, the vacuum sealer tape is probably just worn out and needs to be replaced. X-HOME replacement Teflon strip is the highest quality available. Replacing your heat strip is recommended if it appears worn or you’ve run in to any problems with sealing
- Easy to use,After pulling the old teflon/PTFE tape for vacuum off and cleaning the heat strip well,then cut the new Food Saver sealing strip to size with sharp scissors, peeling the backing off the tape and stuck it on.very easy to install and extended the life of your Food Saver .Application was easy and it works great
- PACKAGE:4 Food Saver teflon Strips are each 8 inches long x 0.5 inches wide. These are purposely slightly longer and wider than necessary, simply trim length to fit your sealer model. The extra width gives you a bit more room to ensure proper coverage
- WIDELY USED IN ALL VACUUM SEALER MACHINES: X-HOME Food Saver Teflon tape work in all vacuum sealers. Including Food Saver, VacMaster, Weston, Cabelas, Rival, Seal-a-Meal, Ziploc and more
- NO-RISK:You will be satisfied with our teflon tape for vacuum,if not, we promise to make refund unconditional,just tell us directly
Description
Ready to order a new foodsaver machine?
DON’T WASTE YOUR MONEY!LOOK HERE!
If the only problem you are having with your vacuum sealer is the adhesive teflon heat strip is not sealing completely, and will not maintain the vacuum created, then you should give this solution a try before spending your money on a whole new machine.
For very little money, this food grade teflon tape will fixed your problem entirely. The installation takes only seconds and is a no brainer. The result is our ten year old unit works like new again.
Package including:
4 teflon heat tape strips with size 8inch long and 1/2inch width
HOW TO INSTALL:
1)Pulling the old tape off and cleaning the heat strip well
2)Cut the new tape to the correct size with sharp scissors
3)Remove the yellow backing from the tape and place over the heating element (under the element if using for an impulse sealer). Smooth out the tape with your finger as you go, to ensure a good bond.
Just be sure of what is wrong with your unit before buying so you can avoid disappointment.
7. Weston Vacuum Sealer Pro Series Maintenance Kit (08-0501-W), Part Kit for 65-0101, 65-0201, 65-0401-W
8. PTFE Tape/Teflon Tape for Vacuum, Hand and Impulse Sealers (1/2-inch x 30 feet) – Fits FoodSaver, Seal A Meal, Weston, Cabella’s by IMPRESA
Feature
- 1/2″ wide x 30 foot long Teflon tape / PTFE tape roll with adhesive backing. Fits virtually all FoodSaver, Weston, Cabella’s, Nesco and Seal-A-Meal vacuum sealers, as well as most models of hand / impulse heat sealers
- Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer
- Tape may be slightly wider and longer than necessary, allowing for broad compatibility. Strip should be replaced when appearing warn, discolored or if sealing isn’t perfect
- Just peel tape from the roll and place on the correct area (you may need to clean the strip location before placing the new piece of tape). Over the wire for vacuum sealers, under the wire for impulse sealers
- Ideal for virtually all FoodSaver models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston Pro 2100, 2300 and more. By IMPRESA (TM)
Description
NEW Made in USA
9. FoodSaver Replacement Gaskets (4 Foam Gaskets) – Fits FM2000, FM2010, FM2100, GM2050, GM2150 Series Vacuum Sealers (Replaces FoodSaver Item 176870-000-000) by OutOfAir
Feature
- FIX THE SUCKING: If your FoodSaver is having a difficult time holding the vacuum while sealing, it’s likely that you just need to replace your gaskets!
- WORKS WITH: FM2000, FM2010, FM2100, GM2050, GM2150 models. Not meant to be used for any other models.
- FOAM GASKETS: If you have 1 Foam and 1 Rubber Gasket, only replace your FOAM gasket. Don’t remove the rubber gasket. If you have 2 foam gaskets, always replace both foam gaskets at the same time.
- REPLACE ANNUALLY: We recommend replacing your gaskets once a year to ensure you’re getting the best performance out of your machine.
- UPPER and LOWER: These gaskets are made to replace both the upper and lower gaskets in these machines.
Description
If your FoodSaver vacuum sealer is having trouble holding suction while sealing, our gaskets may be able to help you. These gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them at the same time. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)
Works With These Models: FM2000, FM2010, FM2100, GM2050, GM2150 models
Conclusion
By our suggestions above, we hope that you can found Vacuum Sealer Gasket for you.Please don’t forget to share your experience by comment in this post. Thank you!
