Top 10 Water Cooling Petg Hard Tube Bending Kit

Now making custom bends with rigid tubing could not be easier. With the Bykski Rigid Tubing 45/90/180 Degree Bending Kit – 16mm OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tools have mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

LENX 8 PCS PETG Tubing cut and bending tool kit

Package:
1.Cutter
2.3 pcs 45° 90° 180° PETG Bending Tool
3.2 pcs Bending Rubber
4.PETG Chamfer Tool
5.File

XSPC PETG Tool Kit to bend and cut PETG tubing.Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper.For use with XSPC branded PETG tubing.May not be compatible with other branded PETG products.

Features:
Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three. Suitable for 16mm rigid tubes. 16mm supporting tube outer diameter, 16MM acrylic tube hot bending assisted angular positioning. 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees. High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold. Need enough heat to bend (such as a heat gun).
Specification:
Material: ABS
Color: Black
OD: 16mm / 0.63inch
Size: approx. 9.2 * 7.1 * 2.1cm / 3.62 * 2.8 * 0.83inch

Package list:
3 * Rigid Tube Bender Mould

Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Barrow ABS 12MM Hard Tube Bending Kit, Black

Model: AWGM3-12

More and more fans of water cooling rely on HardTubes for aesthetic and practical reasons. The great challenge for the user is that the pipes need to be bent to fit the water loop. To make this possible, the Alphacool Eiskoffer Light contains most of the tools required to bend the HardTubes quickly and effectively. All you need is a hot air gun and a saw to cut the HardTubes to the desired length. This not only ensures a fantastic looking system, but also makes the assembly of the water cooling much easier. The Alphacool Eiskoffer Light contains a large circular and a multi-sheet mandrel. This makes it easy to make all desired angles. All mandrels are designed for HardTubes with an outer diameter of 12, 13 or 16 mm. Two fitting stops are included so that the correct length can be measured immediately during bending. These simulate the depth of the Eiszapfen fittings. Four additional feeders with pin stops can be used in a variety of ways. Either as a support to create several radii simultaneously, or as an end stop point. All feeders and stops can be screwed onto any wooden board. The matching wood screws are included in the set. Two 80 cm long bending inserts for HardTubes with 10 and 13 mm inner diameter are available so that bending of the HardTubes is done correctly. The functions of all included tools are described in detail in the enclosed manual. The entire tool comes in a sturdy cardboard box. All tools are embedded in thick foam so that the tool is safely stowed away. This means that the tool can always be neatly packed back at the end of the work and the case can be neatly stowed in the desired place. With the Eiskoffer Light you get a perfect start into your HardTube bending journey, ensuring professional looking bends straight out of the box. Technical Details Dimensions (LxWxH): 382 x 332 x 67mm Material mandrels: Nylon Compatible tube sizes: 13 and 16mm inner diameter Scope of Delivery 1x Alphacool Eiskoffer Light – bending kit

【Product characteristics/ specifications】bitspower dual/ single D5 top design with reservoir Bitspower Z – multi/ Z – Tube/ Z series only support vertical retention bracket Included RoHS Compliant.

Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.

Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.

• Material: PETG
• Inside Diameter: 12 mm
• Outside Diameter: 16 mm (5/8”)
• Length: 100 cm *4
• Color: Transparent

Create perfect cuts on up to 25mm tubing with the PrimoChill Universal Tube Cutter. It comes with a wide cutting base to support tubing while cutting. The result is an even cut that allows a perfect seal to the base of your fittings. The quality surpasses any other cutter on the market with a full metal body that allows a stable feel when gripped. The stability ensures the frame doesn’t twist making these a safe solution for all your cutting needs.

Specifications

Included Parts

Warnings:PrimoChill is not responsible for any hardware damage. Use at your own risk.