Top 9 Water Cooling Sensor

Highly precise In-line temperature sensor for almost all G1/4″ threads. The sensor can be integrated at any point in the cooling loop. At the measuring point the wall thickness of the casing is reduced to <1mm and="" the="" sensor="" is="" insulated="" from="" the="" outside="" to="" allow="" maximum="" precision="" and="" quick="" reaction="" of="" the="" measurement.="" due="" to="" its="" inner="" diameter="" of="" 1cm="" this="" sensor="" adds="" no="" restriction="" compared="" to="" fittings="" and="" small="" to="" medium="" sized="" tubing.="" therefore="" this="" sensor="" is="" truly="" ''high-flow="" capable".="" this="" cable="" is="" not="" only="" practical,="" it="" is="" also="" optically="" appealing,="" the="" surrounding="" mesh,="" also="" called="" mesh,="" which="" is="" surrounding="" the="" cable="" itself="" offers="" the="" advantages="" that="" every="" pro-modder="" is="" looking="" for:="" a="" completely="" unique="" look,="" even="" of="" the="" cables="" in="" the="" system!="" special="" attention="" was="" paid="" to="" the="" combination="" of="" cable="" connectors,="" sleeve="" and="" heatshrink="" which="" were="" used="" to="" ensure="" great="" design="" and="" a="" unique="" as="" well="" as="" elegant="">

Model: 71225

Alphacool Eiszapfen Temperature Sensor A sensor that simply screws into a G1/4” thread. Comes with cable and 2-pin connection. Can be attached to any free G1/4” thread opening on a radiator, reservoir, or t-piece integrated into the loop. Fully sealed and absolutely watertight. Fully galvanized – no corrosion issues! Full functionality with any PC temperature indicator compatible with standard PC temperature indicators! Control your PC independent of the BIOS sensors: that’s a double safeguard, like the familiar “redundancy” (double security) in the professional sector. Long (50cm) connector cable, suitable even for a Big Tower! Scope of Delivery: 1x Alphacool Eiszapfen temperature sensor plug G1/4 – chrome This is a 10 kOhm temperature sensor which is compatible with, among others, the following devices: Aquaero 3.07, aquaero 4.00 Aquastream XT Ultra Aquaduct variants with external sensor input (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer Sensor input on many motherboards

Alphacool “Eisfluegel”: The flow indicator with added value! Water cooling in a computer always serves as a visual upgrade. Neatly arranged hosing or HardTubes make for an impressive sight. With the Alphacool “Eisfluegel”, you can add in an extra eye-catcher. The silent revolution of the fan wheel will always show the direction of the flow. The combination of acetal and plexiglass is a winning combination which fits seamlessly into any system. Besides the two ¼” screw threads necessary for the water flow, Alphacool “Eisfluegel” also has another screw thread on the upper side which can be used for many purposes: illumination, fill port, drain port, or as an angled piece – functionality is still guaranteed even if the upper thread is used as an outlet. The fan with six blades inside is also made of plexiglass and the outer sides are marked in two different colours, blue and yellow. The side with the greater contrast can be chosen depending on the colour of the fluid. Technical Specifications Materials: acetal, plexiglass, nylon Colours: black, transparent, yellow, blue Dimensions (LxWxH): 44.5 x 32.1 x 48.4 mm Screw threads: 3x G1/4” Scope of Delivery 1x Alphacool “Eisfluegel” 1x G1/4” screw plug

The Bitspower G1/4 Thread Flow Sensor is a great way to install a safety valve into your looping loop. Just install this flow sensor into your cooling loop and connect the rpm cable on your motherboard CPU fan header. Once installed the flow sensor will send the RPM signal to the mainboard thus allowing you to utilize the BIOS safety settings. These can also be used on fan controllers and other RPM sensing devices as well! Model: BP-FS-CLBKDBR.

Extremely precise temperature sensor for G1/4″ threads. The sensor can be integrated into a reservoir by inserting it into a free thread. It seals tightly with its integrated O-ring seal. Installation ins easy and tool-free as the shaft is knurled, allowing a tight grip on the sensor. In the area of the sensor head the material strength is smaller than 1mm, allowing quick and precise measurements. Thanks to its G1/4″ thread the sensor is universally compatible with most watercooling components.

Model: 71228

Barrow G1/4″ 10K Temperature Sensor Stop Fitting, Black

Model: TCWD-V1

EK-AF FillPort is a panel mounted adapter, primarily designed as an extension to reservoir to function as a service port. This adapter fitting allows easier topping-off and can alternatively also serve as a drain-port.

This adapter is equipped with one standard female G1/4″ port and is closed-off by enclosed G3/8″ Plug, required Allen Key is also enclosed.

Made from black coated CNC machined brass.

Technical data:
Threading: 1 x G1/4″
Plug: 1 x G3/8″
Thread length: 7.0mm
Diameter: 33.0mm
Height: 27.0mm

ROHS 2.0 compliant!

PLEASE NOTE:

This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109846933

EK-AF T-Splitter is a simple cube-shaped adapter fitting with 3 (three) G1/4″ BSP Female threads. This product is useful for splitting or combining the liquid flow in your loop.

Made from black coated, hand polished brass.

Technical data:
Threading: 3 x G 1/4″ (All Female)
Thread length: 7.0mm
Dimensions: 24x24x21mm (WxDxH)

ROHS 2.0 compliant!

PLEASE NOTE:

This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109847107

Bitspower water flow monitor for water-cooling systems with Digital RGB LED

Model: BP-HFI-DRGB